Repeater BeastFPV NSU 2 channels of control and video

Order the BeastFPV NSU 2 channel repeater - choose reliable communication over long distances!

BeastFPV repeater NSU 2 channels of control and video is a key link for long-distance flights. This compact and powerful device relays the signal. It significantly increases the communication range and reliability. You will forget about sudden interruptions in the FPV signal and control.

The device creates its own network for data transmission. It receives a weak signal from the quadcopter at a long distance. The transponder then amplifies and retransmits it to the pilot. This allows you to fly confidently over obstacles and over long distances.

• Two independent channels for simultaneous video relay and control.

• High transmitter output power up to 1.5 W for maximum coverage.

• Support for popular protocols Controls Crossfire, ExpressLRS, TBS Tracer.

• Versatility of work with analog and digital video systems DJI, HDZero.

• Self-powered from a 18650 battery and a convenient display for control.

Operating principle and main features

The repeater works as an intermediate station. You place it on a high point in the terrain. For example, on the roof of a car or on the side of a hill. The drone communicates with the repeater on a clear frequency. And the repeater transmits the data to your ground station.

This design dramatically increases the effective flight range. The signal does not need to travel the entire distance directly. The quality of the video stream and control remains stable and clear. You gain a decisive advantage in take-out flights.

The technical characteristics of the device ensure this reliability. Video frequency range 5.2-5.9 GHz. Control frequency range 860-930 MHz or 2.4 GHz. Video output power up to 1.5 W, control up to 2 W. The bright OLED display shows all critical parameters.

Features and functionality

The functionality includes simultaneous reception and transmission. Built-in filters minimize interference from other devices. You can quickly change channels and power in the field. Configuration is carried out using a convenient interface wheel.

The repeater is compatible with most modern systems. It works with Crossfire, ExpressLRS, TBS Tracer receivers. It perfectly transmits the signal from analog cameras and VTX. It is also compatible with DJI FPV and HDZero digital systems.

Autonomy is ensured by the 18650 battery compartment. The charge lasts for several hours of active use. The device has a durable aluminum housing. It protects electronics from overheating and mechanical damage.

Buy the BeastFPV NSU 2 channel repeater in the AEGISKY store. He will become your reliable partner in exploring new places. It is suitable for relaxed long-distance flights and competitions. Order it and expand the boundaries of your flights today.

Specifications

• MCU: STM32.
• Input voltage: XT60, 3S–6S LiPo.
• Data transmission via cable: up to 300 m.
• Interfaces: XT60, UART, JR slot, RJ45, AV.
• Supported protocols: ELRS, TBS, CVBS, CRSF.
• Transmitter slot: Micro.
• Maximum power: ≥30 W (for VTX and ELRS TX).
• Video receiver interface: FatShark / AV.
• Supported video frequencies: all frequencies.
• Supported control frequencies: 433 / 720 / 868 / 915 / 2.1G / 2.4G.
• CRSF interface speed: 921k baud.