Programmable power supply OWON ODP3063

Buy OWON ODP3063 Programmable PSU for Accurate Testing of Drones and Electronics

OWON is a Chinese brand founded in 2012. The company specializes in control and measuring equipment. The range includes oscilloscopes, signal generators, and multimeters. OWON also produces ODP and P series power supplies. The products are used in laboratories, education and manufacturing.

• Two independent 30V/6A channels with 1mV/1mA resolution.
• The third channel is 6 V / 3 A for powering digital circuits.
• Voltage ripple less than 1 mV for clean energy.
• Memory for 100 groups of arbitrary waveforms.
• USB, RS232, LAN interfaces for remote control.

How does a programmable linear power supply work?

Linear stabilization circuit ensures low noise level. The microprocessor controls the output parameters with high precision. TFT display shows voltage, current and power. You can connect channels in series or in parallel. The software creates complex power profiles. Overload and polarity reversal protection protects the device.

Technical characteristics and functionality

The ODP3063 model has two adjustable channels 0–30 V / 0–6 A. The third channel produces a fixed 6 V at a current of up to 3 A. The resolution for setting voltage is 1 mV, current is 1 mA. Voltage ripple ≤1 mV (RMS), current ripple ≤5 mA (RMS). Load influence: ≤0.01% ±3 mV and ≤0.2% ±3 mA. Mains influence: ≤0.01% ±3 mV and ≤0.01% ±3 mA.

The memory stores up to 100 free-form profiles. There is protection against overload and polarity reversal. The automatic cooling system is active. TFT LCD display 9.9 cm (480×320 pixels). Interfaces: USB 2.0 (host and device), RS232, LAN. Dimensions 358x250x158 mm. Weight 12 kg.

The power supply is ideal for debugging flight controllers. Used for testing ESC and servos. Allows you to simulate battery discharge. The third channel is convenient for powering sensors. High stability is needed for accurate measurements.

• Number of channels: 2 independent adjustable channels + fixed voltage channel 6 V with output current up to 3 A
• Possibility of parallel or serial connection of channels: yes
• Output voltage of each adjustable channel: 0-30V, setting accuracy 1mV
• Output current of each adjustable channel: 0–6 A, setting accuracy 1 mA
• High stability and low ripple: ≤ 1 mV RMS, ≤ 5 mA RMS, 20 Hz – 20 MHz
• Low load influence: ≤ 0.01% ±3 mV, ≤ 0.2% ±3 mA
• Low influence of mains voltage: ≤ 0.01% ±3 mV, ≤ 0.01% ±3 mA
• Memory: Up to 100 characteristic groups for creating arbitrary waveforms
• Overload and reverse polarity protection: yes
• Automatic cooling system: yes
• Display: TFT LCD display 9.9 cm (480×320 pixels)
• Interfaces: USB 2.0 (host and device), RS232, LAN
• Dimensions: 358 x 250 x 158 mm
• Weight: 12 kg