PrinCe iBase Combo Receiver

Choose the reliable PrinCe iBase Combo GNSS receiver for your field base and high-precision RTK measurements!

Provide yourself with a stable and powerful base station for any geodetic tasks. The PrinCe iBase Combo GNSS receiver is a budget-class monoblock device specifically designed for use as an RTK base. The device is equipped with a modern 1408-channel board capable of receiving signals from all existing satellite systems: GPS, GLONASS, BeiDou, Galileo, QZSS and SBAS. You get a reliable foundation for high-precision measurements in any conditions.

• Built-in powerful 5 W VHF radio modem. Transmits RTK corrections over a distance of up to 25 km in ideal conditions and up to 5 km in complex buildings or forests.

• Long lasting protection and strength. The magnesium alloy body is IP67 rated and can withstand 2m drops.

• Maximum autonomy. Two replaceable hot-swappable 7000 mAh batteries provide up to 12 hours of operation in VHF base mode.

• Universal communication channels. Built-in 4G GSM, Bluetooth, Wi-Fi and NFC for transmitting corrections via the Internet or direct connection to the controller.

• Extreme reliability. Operates at temperatures from -40°C to +65°C, which is ideal for the Russian climate.

How this smart surveying tool works

The operating principle of the PrinCe iBase Combo GNSS receiver is based on receiving signals from satellites and calculating exact coordinates. The device works as a local RTK base station. It continuously monitors satellite signals and generates differential corrections. These corrections are transmitted in real time to the rover receivers via a built-in 5 W VHF radio modem or via 4G cellular communications.

The built-in inertial IMU system tracks the displacement of the base receiver and allows it to be used as a rover. The 8 GB internal memory stores raw data for post-processing and measurement quality control. The web interface and OLED display make setting and monitoring parameters easy. The receiver can also work as a VHF repeater, increasing the RTK coverage area for several rovers simultaneously.

The Combo kit includes the receiver, SJW20-QS tripod, two extra batteries, charger, radio antenna, Y-cables, tribrach, tape measure and carrying case. The receiver can also be used as a rover when mounted on a pole.

Buy the PrinCe iBase Combo GNSS receiver from the COPTERPARTS store. This is a reliable and affordable solution for high-precision geodetic measurements. Our specialists will help you choose and answer your questions. Place your order right now on our website.

Specifications

• Number of channels: 1408
• NAVSTAR GPS: L1C/A, L1C, L2C, L2P(Y), L5
• GLONASS: L1C/A, L2C, L2P, L3
• BeiDou: B1L, B2L, B3L, B1C, B2A
• Galileo: E1, E5A, E5B, E6
• QZSS: L1, L2, L2C, L5, L6
• SBAS: L1, L5
• PPP: B2B
• SKP Statics in plan: ±2·(2.5 + 0.5·10⁻⁶ ·D)
  SKP Static height: ±2·(5 + 0.5·10⁻⁶ ·D)
• SKP PPK in plan: ±2·(8.0 + 1.0·10⁻⁶ ·D)
• SKP PPK height: ±2·(15.0 + 1.0·10⁻⁶ ·D)
• UPC RTK in plan: ±2·(8.0 + 1.0·10⁻⁶ ·D)
• UPC RTK height: ±2·(15.0 + 1.0·10⁻⁶ ·D)
• UPC DGPS in plan: ±2·(250 + 0.5·10⁻⁶ ·D)
• UPC DGPS height: ±2·(500 + 0.5·10⁻⁶ ·D)
• Error for pole tilt: 10.0 mm + 0.7 mm/degree tilt
• Initialization time, sec: 99.9%
• Multipath suppression technology: yes
• Carrier phase measurement with low noise level: yes
• Number of RS232 interfaces: 1 (Lemo 7)
• Bluetooth 4.1: yes
• EDR support: yes
• Wi-Fi: yes
• NFC: yes

Additional data

• Built-in GSM/GPRS modem: yes
• Built-in VHF modem: Rx/Tx
• Transmission power, W: 5
• Frequency range, MHz: 410-470
• Possibility of connecting external GSM and VHF modems: yes
• Correction formats: RTCM 2.1, RTCM 2.3, RTCM 3.0, RTCM 3.2 MSM, CMR
• Electronic level: yes
• Electronic compass: no
• Message output format: NMEA
• Supported terrestrial protocols: CHC, Transparent, TT450S, Satel
• Satellite measurement recording formats: HCN, HRC, RINEX 2.x, 3.x
• Built-in memory: 8 GB
• Case material: magnesium alloy
• Dust and moisture protection: IP67
• Shock resistance: withstands a 2 meter drop onto concrete
• Humidity: 100%
• Immersion in water depth: 1 m
• Possibility of connecting an external GNSS antenna: no
• Power consumption: 12 W
• Battery type: removable
• Capacity of one battery, mAh: 7000
• Number of batteries in the receiver: 2
• Number of batteries in the standard set: 2
• Static operating time, hours: 15
• Operating time in RTK, in hours: up to 12 (VHF RTK 5W), up to 12 (GSM RTK)
• External power input, V: 9.0-28.0
• Web interface: yes
• Front panel display: OLED, 0.96″
• Front panel indicators: LED indicators
• Operating temperature: -45 °C to +65 °C
• Storage temperature: -45 °C to +85 °C
• Dimensions (d, h): 160.5 x 103 mm
• Receiver weight: 1.73 kg/