FlyFishRC M10 Mini GPS module

Order the FlyFishRC M10 Mini GPS module - get maximum navigation in a minimum size!

FlyFishRC M10 Mini GPS module is your reliable guide in the sky for compact drones. It provides stable reception of signals from satellites. You will always know the exact location of your device. Enjoy confidence when flying long distances. This module will return your drone home with one button.

Key advantages of the module:

• High positioning accuracy on the U-blox M10 chip.

• Supports GPS, GLONASS, Galileo and BeiDou.

• Very fast acquisition of satellites during a cold start.

• Ultra-compact size for the smallest drones.

• Fully compatible with popular flight controllers.

With this module you get key security features. Your drone will gain intellectual abilities. It will be able to automatically return to its take-off point. Will stably hold position in loiter mode. This is the most important step towards becoming a professional pilot.

Operating principle and technical features

The module simultaneously receives signals from several satellite systems. It calculates the travel time of the signal from each satellite. Based on this data, the exact location is determined. You get coordinates with minimal error. This ensures the highest level of reliability.

The U-blox M10 chip has low power consumption. At the same time, it provides high sensitivity of the receiver. The module quickly acquires satellites even after a long period of inactivity. You won't have to wait long before your flight begins. This is the so-called “fast cold start”.

The module board has ultra-compact dimensions of 25.5×25.5mm. It easily fits on the smallest drone. Durable textolite coating protects electronics. It protects against moisture and accidental short circuits. Your equipment will be reliably protected.

A standard 4-pin connector is used for connection. Typically these are power and data wires (UART). Color-coded wires make correct connections easy. You reduce the risk of error when assembling your model. All connections will be reliable and durable.

The module effectively filters interference and multipath reflections. This improves positioning accuracy in difficult conditions. For example, in urban areas or near trees. You can trust the readings even in less than ideal environments. This is an important safety factor.

Reliability for professional use

The system supports all major satellite constellations. These are GPS (USA), GLONASS (Russia), Galileo (EU). As well as BeiDou (China) and QZSS (Japan). The more satellites in the visibility zone, the more accurate the positioning. You get reliable navigation anywhere in the world.

The “Return to Home” function becomes available after receiving the fix. When activated, the drone will automatically return to its take-off point. This will save your device if the signal is lost or the battery is low. You will always be confident in the safety of the drone.

The module easily integrates with popular flight controllers. For example, with Betaflight, iNAV, Emuflight, ArduPilot. Configuration is carried out through convenient graphical interfaces. You don't need deep technical knowledge. The installation process will take a minimum of time.

Compactness does not compromise functionality. The module provides all key navigation functions. You get a full range of features for safe flights. This saves valuable space and weight on the frame.

Specifications 

• GPS module protocol: Ublox/NMEA
• Speed detection accuracy: 0.05 m/s
• Cold start: 30 s
• Hot start: 1-3 s
• Tracking sensitivity: -167 dBm
• Input voltage: 3.3~5.5V (5V typical)
• Maximum flight altitude: 50000 m
• Maximum speed: 500 m/s
• Maximum acceleration: 4G
• Baud rate: 4800-115200 bps (115200 bps recommended)
• GPS module size: L16.2x W12.3x H4.9mm
• GPS ceramic size: 12*12mm
• Weight: 2.4 g (±0.5 g).