Flight controller Axisflying Argus F745 AIO 40A

Order Axisflying Argus F745 AIO 40A Flight Controller for Next Level Performance

The Axisflying Argus F745 AIO flight controller is a high-performance solution. It combines a powerful processor and reliable speed controllers. You'll get everything you need to build a top-of-the-line drone. In one professional building. This is the choice for racing and challenging freestyle.

The system is based on a modern STM32F745 processor. It provides the highest computing speed. You will be able to use a gyroscope with a frequency of 8 kHz or more. Get maximum responsiveness and stability in flight.

The board is equipped with built-in 40A speed controllers. This is enough for the most powerful 5-6 inch engines. You will receive stable power to the motors without drawdowns. Even during aggressive maneuvers.

5 main advantages of the model

The Axisflying Argus F745 controller has key advantages. It is designed for the most demanding pilots. Here are the main advantages of this model.

• Powerful 32-bit STM32F745 processor. It provides the highest gyroscope frequency. For uncompromising stability and control.

• Built-in speed controllers for 40A (peak 55A). They will provide energy to even the most voracious motors. No risk of overheating.

• Two gyroscopes for increased system reliability. If one fails, the drone will remain controllable. This is an important insurance.

• Full integration and compact form factor of 30x30 mm. Everything you need is already on one board. This simplifies assembly and reduces weight.

• Support for Betaflight and Emuflight firmware. You will have access to all modern features. You can fine-tune the drone.

Reliability for extreme loads

The controller uses ICM-42688-P dual gyros. They operate with high polling rates and low noise. This ensures precise stabilization in dynamic flights. You will receive a crystal clear video signal.

The board has a well-thought-out power supply system. It can withstand voltage up to 4S. And ensures a stable power supply to all components. You will avoid failures due to voltage sags.

The cooling system effectively dissipates heat. Slow board layers and high-quality components. This prevents the regulators from overheating under load. Guarantees stability during long flights.

The board supports all modern interfaces. Including UART, I2C and full size HDMI connector. You can connect all the necessary peripherals. No additional fees required.

Specifications

• Target FC: AXISFLYING F745 AIO
• MCU: STM32F745
• Gyro: ICM42688P
• Uart: 8
• DJI dedicated connector: Supported
• Barometer: Supported
• BEC: 5V/2A(MAX 3A) 12V/2A(MAX 3A)
• OSD Menu: Supported
• GPS: Supported
• LED: Supported
• Beep: Supported
• Mount: 20*20mm
• Weight: 14.4 g
• Size: 38*45*7 mm.