Camera module VEYE-YT0.95-4I

Order the VEYE-YT0.95-4I camera module for your VEYE cameras!

Get maximum image quality in low light conditions. The VEYE-YT0.95-4I camera module is specially designed for use with VEYE MIPI series cameras such as CS-MIPI-IMX307 and VEYE-MIPI-IMX462. It features a record aperture of F/0.95, which allows the camera to see at dusk and in low light.

The 4mm focal length provides a wide viewing angle of approximately 110 degrees diagonally for a 1/2.7" sensor. The built-in IR-CUT mechanism and IR cut filter allow you to use the lens both day and night, automatically switching between modes. Choose professional optics for your projects. Order VEYE-YT0.95-4I right now in our store.

• Record aperture of F/0.95 for shooting in extremely low light conditions.

• High resolution, suitable for sensors up to 5 MP, with clear images across the entire field.

• Wide 109.9 degree viewing angle for excellent situational awareness.

• Built-in IR filter and IR-CUT mechanism for automatic day/night switching.

• High quality optics with 5 glass and 4 plastic lens design for minimal distortion.

Operating principle and optical characteristics

The VEYE-YT0.95-4I lens is a high-quality optical system designed for industrial machine vision cameras. It is installed on cameras with M16*P0.5 mount, which is standard for VEYE modules. F/0.95 aperture means that the lens collects the maximum amount of light, allowing the sensor to work in light levels that are inaccessible to conventional optics. This is critical for CCTV systems, drones and robots operating at dusk or at night.

The optical design consists of 5 glass and 4 plastic lenses (5G4P), which provides excellent aberration correction and high sharpness across the entire frame field. The viewing angle diagonally is 109.9 degrees for a 1/2.7-inch format sensor, horizontally 92.3 degrees, vertically 48.7 degrees. Optical distortion (distortion) is -40.8 percent, which is typical for wide-angle lenses and is corrected by software.

Specifications and Compatibility

Explore the detailed parameters of the VEYE-YT0.95-4I lens. Focal length 4 millimeters. Maximum aperture F/0.95. The optical format of the lens is designed for sensors up to 1/2.7 inches. Threaded fastening M16*P0.5. The lens has a built-in IR filter and an IR-CUT filter switching mechanism controlled from the camera.

The lens is compatible with a wide range of VEYE cameras, including models CS-MIPI-IMX307, VEYE-MIPI-IMX462, VEYE-MIPI-327E and others. It is used both in single-camera configurations on Raspberry Pi and Jetson Nano, and in multi-camera systems, for example, on the ADP-N1-6CAM board for Jetson TX2 and Xavier, where up to 6 such lenses are installed simultaneously. The CS-FPD-CAM-IMX307 kit is available on Amazon, which includes this lens designed for machine vision, predictive analysis and ADAS.

Areas of application and operation

The VEYE-YT0.95-4I lens is ideal for mounting on FPV drones operating in low light conditions. It is indispensable in machine vision systems for robotics, where clear images with minimal light are required.

With a wide viewing angle, it provides excellent situational awareness for navigation and obstacle avoidance. Used in professional video surveillance systems and industrial facilities where round-the-clock operation is important. Multi-camera configurations with these lenses are used to create panoramic vision and 3D reconstruction systems.

Specifications

• 1/2.8" 2MP IMX462 sensor from SONY
• MIPI output: CSI-2
• Uncompressed format UYVY, YUV422-8bit
• Standard Lens Mount
• IR-CUT circuit
• BLC, DOL-WDR, 2D/3D noise reduction, anti-fog, brightness, contrast, sharpness,
• saturation adjustment
• Stream Mode and Capture Mode
• HR management
• Raspberry PI, JETSON, i.MX8m support
• Open source drivers and applications for all supported platforms
• Support 5V - 3.3V access at the same time, 5V power supply automatic switching
• Also support 5V, 3.3V independent power supply.