BIGTREETECH SKR V1.4 motherboard

Order the BIGTREETECH SKR V1.4 motherboard for a silent upgrade of your 3D printer!

BIGTREETECH SKR V1.4 motherboard is a powerful 32-bit 3D printing controller. The model was created for upgrading old printers and assembling new ones. With this board, printing will become faster, quieter and better quality.

• 32-bit ARM Cortex-M3 processor for high processing speed.
• Supports TMC2209 silent drivers with StealthChop2 technology.
• Supports Marlin 2.0 and Klipper firmware for complete customization.
• Two independent ports for Z axis motors.
• Protection of the USB port from burnout due to short circuit.

Buy a modern board for silent and fast printing

The BIGTREETECH SKR V1.4 board is built on an NXP LPC1768 microcontroller. This is a 32-bit ARM Cortex-M3 with a frequency of 100 MHz. There is also a Turbo version on the LPC1769 chip. Its frequency reaches 120 MHz. This gives a performance increase of about 20%. The board operates on 12-24 VDC. 

The current strength is 5-15 Amperes. The dimensions of the board are 110 x 85 mm. The board has 5 channels for controlling motors. These are the X, Y, Z axes and two extruders E0, E1. The table's power reaches 144 W. The board supports many stepper motor drivers. These are TMC2209, TMC2208, TMC2130, DRV8825, A4988 and others.

A special feature of the model is support for touch screens. These are TFT35, TFT43, TFT70 and other popular screens. Regular LCD2004 and LCD12864 are also supported. A built-in BLTouch port makes automatic table calibration easy. It is possible to connect a thread break sensor and end detector. The board supports the function of continuing printing after a power failure. A built-in microSD card slot makes firmware updates easy. You can change the firmware without a computer.

Choose high-quality components from the manufacturer BIGTREETECH

Manufacturer BIGTREETECH is a team from Shenzhen. The company name is Shenzhen BIQU Innovation Technology Co., Ltd. BIGTREETECH specializes in controllers for 3D printers. The brand's products are extremely popular among enthusiasts. BIGTREETECH engineers are constantly improving their designs. All boards undergo strict quality control. The manufacturer offers open source software. This allows you to fine-tune the printer for any task.

A special feature of BIGTREETECH boards is their thoughtful design. The board has improved cooling of MOSFET transistors. Removable fuses make it easy to replace in case of overload. Separate USB and power supply protects your computer. Multi-colored connectors reduce the risk of connection errors. 

The board is compatible with most popular 3D printers. These are Ender-3, CR-10, Anycubic and many others. The SKR V1.4 is the direct successor to the successful V1.3. The board has all the necessary interfaces for modern upgrades. You can connect RGB LEDs and a Wi-Fi module.

• Case dimensions: 110 x 85 mm
• Mounting hole dimensions: 102 x 76 mm
• Microprocessor: ARM Cortex-M3 CPU
• Input voltage: DC 12–24 V, 5–15 A
• Logic voltage: DC 3.3V
• Wi-Fi module: ESP-01S
• Supported driver operating modes: SPI, UART, STEP/DIR
• Motor driver interfaces: X, Y, Z, E0, E1 (five interfaces, each expandable), up to 256 microsteps
• Supported file formats: G-code