Video transmitter T-MOTOR FT800

Order the T-MOTOR FT800 compact video transmitter for your FPV drone!

Get a stable and clear video feed for confident piloting. The T-MOTOR FT800 video transmitter is designed for racing and freestyle drones with a 20x20 mm mount. It supports a wide power range from 7 to 36 Volts, allowing it to be connected directly to 2S-8S batteries without additional converters.

The device has a switchable output power from 25 to 800 milliwatts for flexible adjustment of range and power consumption. The built-in SmartAudio 2.1 protocol allows you to control all settings directly from the remote control via the flight controller. Choose quality and reliability from the legendary T-MOTOR brand. Order FT800 right now in our store.

• Wide input voltage range 7-36V (2-8S) for universal installation.

• Four power output levels: 25, 200, 500 and 800 mW to suit all flight conditions.

• Supports SmartAudio 2.1 protocol for convenient remote control.

• Compact mount 20x20 mm and low weight of only 7.5 grams.

• 48 operational channels with no interference when switched on for formation flights.

Operating principle and design

The T-MOTOR FT800 video transmitter receives the video signal from the FPV camera and converts it into radio waves for transmission to the pilot's glasses or monitor. The built-in generator generates a carrier frequency in the 5.8 GHz range, and a power amplifier provides the necessary range.

The device is controlled either by buttons on the board itself, or via the SmartAudio 2.1 digital protocol via the same cable as video. This allows the pilot to switch power and channels mid-flight without touching the drone.

The special design of the transmitter prevents interference with adjacent channels when turned on. This is critical when flying in groups and in competitions where many pilots are working simultaneously. The device has a 5 Volt output to power the camera, which simplifies the wiring diagram and saves weight.

Technical characteristics and equipment

Explore the detailed parameters of the T-MOTOR FT800 video transmitter. Input voltage is from 7 to 36 Volts DC, which corresponds to 2-8S LiPo batteries. The number of channels is 48 in the entire 5.8 GHz range. Output power is switchable between 25, 200, 500 and 800 milliwatts .

The mounting holes are made according to the standard 20x20 mm for M3 screws for installation on modern stacks. The weight of the device is only 7.5 grams. A reliable MMCX connector is used to connect the antenna.

The package includes the video transmitter itself, a 90-degree angled MMCX-SMA adapter for convenient antenna placement, as well as a connecting cable for connecting to the flight controller and camera.

Applications and installation

The T-MOTOR FT800 video transmitter is ideal for racing and freestyle drones of any class. Its compact size and low weight allow it to be installed in even the tightest assemblies. Thanks to its wide power range, it can be used on both 3S and 6S drones without additional regulators.

When installing, be sure to connect a high-quality antenna with the appropriate connector. Never turn on the transmitter without an antenna to avoid damaging the power amplifier. Use SmartAudio to easily change channels and power directly from the remote.

Specifications

• Operating frequency: 5.8 GHz
• Number of channels: 48​
• Power: PIT (0 W), 25 mW, 200 mW, 500 mW, 800 mW​
• Control protocol: SmartAudio 2.1​
• Input voltage: 7–36 V (2S–8S LiPo)​
• Weight: 7.58 g​
• Mount: 20×20 mm, M3​
• Antenna connector: MMCX​
• Output voltage: 5 V.