Servo drive KST X15-1208

Choose unique precision - the KST X15-1208 servo drive for your quadcopter!

Applications that require maximum precision, speed and reliability from a mechanical drive require a dedicated solution. Servo drive KST X15-1208 is a high-quality digital drive designed for mission-critical applications in aircraft modeling and robotics. This compact and powerful servo will ensure your drone's mechanisms operate flawlessly. You can order this precision component for your project from the AEGISKY online store.

• High rotation speed 0.08 sec/60° for instant response to commands.

• Powerful torque 8.0 kg*cm for reliable operation under load.

• Digital control and quiet brushless motor for smooth and precise operation.

• Durable Metal Gear (MG) for durability and no play.

• Compact standard size for easy integration into various designs.

Operating principle and functionality

Servo drive KST X15-1208 is an actuator. It receives control signals from the receiver or flight controller. These digital pulses indicate the target position for the output shaft. The built-in chip compares the given position with the current one, determining the error. It then supplies power to the high-speed brushless motor.

The engine drives a set of metal reduction gears. The gearbox increases torque and reduces rotation speed. The shaft rotates exactly at a specified angle, usually in the range of 180 degrees. Such a system provides precise positioning for camera control, reset mechanisms or other functions.

Technical characteristics and scope

The technical parameters of a servo drive determine its capabilities. Model X15-1208 operates from a standard voltage of 6.0V or 7.4V. At 7.4V it produces a torque of 8.0 kg*cm and a speed of 0.08 seconds at 60 degrees. These characteristics make it one of the fastest and most powerful in its form factor. The weight of the device is approximately 60 grams and the size is standard.

This servo drive is designed for professional use. It is ideal for precise control of the 3-axis camera gimbal on a camera drone. Its power is enough to operate the mechanisms for dropping the payload or folding the chassis. It is also in demand in complex aircraft models and robotic manipulators.

A standard three-wire connector is used for connection. Control is carried out using a digital protocol compatible with most equipment. Setting the travel and neutral limits is usually done using a programmer. This ensures precise calibration for a specific mechanical system.

The workmanship meets the highest standards. The drive uses precision metal gears and ball bearings. The housing provides reliable protection from dust and vibration. All this guarantees a long service life even with intensive use.

Specifications

• Rated voltage: 7.4V DC
• Voltage range: DC 6.0V - 8.4V
• Torque:
• 9.8 kgf.cm@6.0 V
• 12.0 kgf.cm@7.4 V
• 13.5 kgf.cm@8.4 V
• Speed:
• 0.10 sec/60°@6.0 V
• 0.08 seconds/60°@7.4V
• 0.07 seconds/60°@8.4V
• Operating frequency: 1520 µs/333 Hz
• Default Stroke Angle: ±50° = 100° Total
• Temperature range: -10 +65
• Soft start: programmable
• Programmable: Yes
• Shell material: aluminum alloy
• Motor Type: Coreless DC Motor
• Gear set material: hardened steel
• Position sensor: Potentiometer
• Case Dimensions: 35.5mm*15mm*32.5mm±0.2mm
• Weight: 40g ± 10%.