Servo drive Flashhobby M60BHW-270

Order the Flashhobby M60BHW-270 servo drive for power and precision over an extended range!

Servo drive Flashhobby M60BHW-270 is a powerful digital drive with an extended rotation angle. It is designed for tasks that require precise positioning in a 270-degree sector. This servo drive combines high torque and reliability. You will have complete control over mechanisms that require a wide stroke angle. This is a professional solution for complex kinematics on your drone.

Key advantages of the device:

• Extended rotation angle - 270 degrees.

• High torque 60 kg/cm.

• Digital control for precise positioning.

• Reliable metal gearbox and ball bearings.

• Operating voltage 6.0-8.4V (2S LiPo/LiFe).

This servo drive opens up new possibilities for machine design. It provides greater travel than standard 180° servos. You will be able to implement more complex and functional control systems. Trust a powerful and dedicated device for precise positioning.

Operating principle and technical characteristics

The servo drive operates like a standard digital drive, but with increased range. It receives a PWM signal where the pulse width determines the target angle. The built-in processor interprets the signal within 0-270 degrees. A powerful motor turns the shaft through a gearbox to a given angle. The position sensor provides precise feedback throughout the entire range.

The 270 degree rotation angle gives greater design flexibility. This allows you to control mechanisms that require more travel than half a revolution. For example, complex taps, multi-position switches or dampers. You get more freedom for engineering solutions without additional gearboxes.

The 60 kg/cm torque provides enormous power even at the edges of the range. The drive is capable of holding and moving heavy loads along the entire trajectory. You will be able to create powerful mechanisms with a wide range of motion. This is a combination of strength and room for maneuver.

A rotation speed of 0.20 seconds per 60 degrees is balanced. It provides fairly fast movement over a full 270° range. Your mechanisms will work smoothly, without excessive harshness. This is important for precise and controlled positioning of heavy elements.

Supply voltage 6.0-8.4V is suitable for standard 2S battery assemblies. The drive can be powered from the on-board network via a BEC or stabilizer. Electronics efficiently manage power while minimizing heat. Your system will be energy efficient and easy to integrate.

Reliability and scope of application

The metal gearbox with a reinforced design can withstand high loads. The gears are designed to operate in extreme positions without misalignment or jamming. This guarantees stability and durability throughout the entire turning range. You can have confidence in the mechanics even with frequent full arc movements.

Applications include specialized mechanisms on drones. Controlling the direction of long-range antennas or lidars. Drives for rotating camera platforms with large viewing angles. Mechanisms for controlling vector thrust or complex aerodynamic surfaces.

The rugged housing protects internal components from dust and vibration. The design ensures heat removal from the engine during prolonged operation. The drive is ready for use under typical flight load conditions. Your systems will operate stably and predictably.

The servo drive is compatible with standard PWM control protocols. It connects to any channel of the receiver or flight controller. To use the full range, a setting may be required in the remote control. This is standard procedure for non-standard angle servos.

This is a device for engineers who find the standard 180 degrees not enough. It solves problems where a larger stroke is required without loss of torque and accuracy. Allows you to simplify kinematics by eliminating additional levers and gears. It becomes a key element for creating unique functional systems.

Specifications

• Motor type: brushless
• Signal type: digital control
• Housing material: CNC aluminum housing (AL6061)
• Cable length: 300mm (JR connector)
• Dimensions: 40 × 20 × 29.5 mm
• Weight: 71 g (±5 g)
• Gears: steel
• Working speed:
• 0.08 sec/60° at 6.0 V
• 0.07 sec/60° at 7.4 V
• 0.06 sec/60° at 8.4 V
• Stall torque:
• 32 kg cm at 6.0 V
• 37 kg cm at 7.4 V
• 40 kg cm at 8.4 V
• Rotation angle: 270°.