Rackmount power supply Argut PS-150K

Buy an Argut PS-150K rack power supply for installation in a server rack!

Set up a professional control desk. The Argut PS-150K rack power supply is designed for integration. It mounts in a standard 19" rack or cabinet. The device combines a stabilized source and a UPS. You get a stable 12 Volts for the equipment. Your communication system will work without interruption. Order the foundation for building a reliable infrastructure. Choose industrial performance from a trusted brand.

• Compact rack mounting in a 19″ rack.

• Uninterruptible power supply (UPS) function.

• Stable output voltage 12V and power 150 W.

• Automatic switching to backup battery.

• Protection against overload and deep discharge of the battery.

Operating principle and purpose

This power supply performs a critical role. It provides equipment with high-quality voltage. In normal mode it operates from a 220 Volt network. In doing so, it charges the connected backup battery. Built-in electronics stabilize and filter the current. A pure voltage of 13.8 V is generated at the output.

In the event of a network failure, instant switching occurs. Power begins to flow from the external battery. The connected equipment continues to work without interruption. This ensures continuity of communication in any situation. After the network is restored, the unit charges the battery again.

Technical characteristics and installation

Check out the exact parameters of the rack version. Output voltage 13.8 VDC. The rated output current reaches 12.5 Amps. The maximum output power is 150 watts.

The design is intended for rack mounting. The standard width of the device is 19 inches. The height is 1U (1 unit) - 44 mm. The depth of the case is 220 millimeters. Mounting “ears” are used for fastening.

There are LED indicators on the front panel. They display the presence of input and output voltage. The battery mode is also shown. Connecting equipment via screw terminals. There are separate reliable clamps for the battery.

Compatibility and Applications

This unit powers professional communications equipment. It is compatible with Argut DR-40 and DR-50 radio repeaters. Provides operation of stationary radio stations A-1000D. Suitable for RoIP-01 and RoIP-04 radio gateways. This is the heart of the control complex.

The device is used in monitoring and control centers. It is installed in server and equipment rooms. Used in emergency dispatch services. This is necessary for telecommunication racks of telecom operators.

For backup, use gel or AGM batteries. Recommended capacity from 7 to 100 Ah. Always ensure correct polarity when connecting. Install a fuse of the appropriate rating in the open circuit.

Specifications

• Rated alternating voltage: From 88 to 264 V
• Frequency: 50Hz
• Rated power consumption from the network: 150 W
• Output voltage: 13.8V ±0.1
• Output current during 24/7 operation: 12.5 A
• Overall dimensions (H×W×D): 40×440×200 mm
• Nominal battery voltage: 12 V
• Recommended battery capacity: 28 Ah (no more)
• Battery charge current: 1 A
• Installation of a power supply in a 19″ metal case: Availability
• Power supply input-output insulation voltage: 3 kV
• Input-to-power supply housing insulation voltage: 1.5 kV
• Insulation voltage output-power supply housing: 0.5 kV
• Power supply short circuit protection: Available
• Power supply overload protection: Available
• Power supply overvoltage protection: Availability
• Power supply overheat protection: Available
• Operating temperature: from -25 to +70 °C
• Efficiency: 83%.