Motor MVM-AVIA BEM 2807-1300

Buy a domestic motor MVM-AVIA BEM 2807-1300 for your powerful drone!

Equip your drone with a reliable Russian power plant. The MVM-AVIA BEM 2807-1300 motor was designed and manufactured in Russia. It is designed for FPV drones operating with 7-9 inch propellers. The engine supports power from 3 to 6S LiPo batteries. It develops a maximum power of up to 1080 watts. Your drone will receive excellent thrust and dynamics. Choose advanced domestic technologies for your projects. Order BEM 2807-1300 right now in our store.

• Completely domestic development and high quality production.

• Powerful N52H magnets for maximum efficiency and traction.

• The 12N14P configuration provides smooth running and high torque.

• Maximum thrust up to 1900 grams for confident lifting.

• Wide power range 3-6S for flexibility in battery selection.

Operating principle and design features

The BEM 2807-1300 motor is a brushless synchronous machine. It works on the principle of interaction of a rotating magnetic field. The current from the battery is supplied to the stator windings through the speed controller. The electronics create a magnetic field that rotates a rotor with magnets. Outrunner design provides high torque at low weight.

The 12N14P configuration means 12 stator coils and 14 rotor magnets. This design is optimal for smooth running and good returns. The use of N52H magnets gives high coercivity and heat resistance. They retain their properties even when heated to 120 degrees. This guarantees stability of thrust in the most severe flight conditions.

Specifications and performance

Study the exact parameters of the BEM 2807-1300 motor. The number of revolutions per volt KV is 1300. This is the optimal value for 7-9 inch propellers. The 12 coil and 14 magnet configuration provides a balance of power and smoothness.

The no-load current at a voltage of 12 V is up to 1.3 Amperes. This indicates low losses and high efficiency. The motor supports 3 to 6S LiPo power supply. Maximum operating voltage up to 24 Volts. The maximum electrical power reaches 1080 watts. The maximum current consumption is 48 Amps.

The magnets are made of N52H material with high energy capacity. Recommended propellers range from 7 to 9 inches in diameter. The maximum thrust reaches 1900 grams in the optimal configuration. This is sufficient for most racing and freestyle drones.

Areas of application and operation

The BEM 2807-1300 motor is ideal for powerful FPV drones. It works great on 7-inch racing copters. Used in freestyle drones to perform complex figures. Suitable for light cargo and research vehicles. This is the choice of pilots who require maximum performance.

For correct operation, a high-quality speed controller is required. We recommend an ESC with a current of at least 50 Amps. Use 7-9" propellers with pitches to suit your flying style. Configure your ESCs via BLHeli Suite for optimal synchronization. Use batteries with a high C-rating to achieve full power.

Domestic production guarantees availability and service support. You receive a motor adapted to Russian operating conditions. The build quality meets the high standards of the MVM-AVIA enterprise.

Specifications 

• Number of revolutions per 1 V (KV): 1300.
• Motor configuration: 12N14P.
• No-load current (12 V), A: up to 1.3.
• Power: 3–6S LiPo.
• Applied voltage, V: up to 24.
• Maximum power, W: up to 1080.
• Maximum current, A: 48.
• Magnets: N52H.
• Applicable propellers, inches: 7–9.
• Maximum thrust, g: up to 1900.