Interception system Korshun V3

Operating principle of the Korshun V3 interception system

User Guide: Tracer Kinetic Anti-Drone System - Personal Version

IMPORTANT: Please read the instructions carefully before operating or servicing this equipment. Use this equipment correctly and with care. Failure to do so may result in equipment damage or personal injury!

Contents

• 1. Disclaimer and Warnings
• 2. Product overview
• 3. Scope of delivery
• 4. Description of parts
• 5. Description of functions
• 6. Installation and use
• 7. High-speed drone video interface and target tracking and acquisition logic
• 8. Technical parameters of high-speed UAV

---

1. Disclaimer and Warnings

This system is produced to ensure national security, protect the interests of the public and prevent criminals from using drones to threaten public safety. This is a product used to counter intruding drones. Identified UAV signature images and data will not be used for purposes other than countering UAVs.

As the end user of the equipment, you warrant that you and your authorized users understand and comply with all applicable laws and regulations and will not use the equipment for any purpose other than ensuring social and public safety. You warrant that you are solely responsible for the conduct and results of any use of this product and will be responsible for compensating us for any damages caused to us as a result of your actions. We are under no obligation to verify or make any guarantees regarding the authenticity of your subject or any behavior in your use of the device, and do not accept any liability for any infringement or damage caused by you.

If you do not object to this statement before using the countermeasures equipment, you will be deemed to have accepted the entire contents of this statement and will be solely responsible for the consequences of violating it.

2. Product overview

The system can be used by individual military personnel and is capable of effectively pursuing and counterattacking invading drones in the defense zone using high-speed drones and on-board AI guidance systems. The on-board AI targeting system can automatically recognize aerial targets (including multicopters and fixed-wing aircraft) within video range for acquisition and countermeasures. Once the target is acquired, the system will automatically launch to pursue and counter aerial targets.

3. Scope of delivery

1. High speed drone (including battery and propellers) *1
2. Individual launcher (including battery) *1
3. Aiming Screen (includes analog receiver) *1
4. Digital HD Receiver (When using Digital HD version) *1

4. Description of parts

1. High speed UAV: Pursues and counters intruder air targets (maximum flight speed 350 km/h).
2. Launch Tray: Holds and supports high-speed drones.
3. Digital HD receiver.
4. Front handle: To keep the system stable.
5. Power switch: Launcher power switch and high speed drone power switch.
6. Aiming screen: Used to receive and display images from high-speed drones in real time.
7. Trigger: Used to launch high speed drones.
8. Main launcher handle: To hold the launcher.
9. Launcher shoulder rest: Used for aiming from the shoulder.
10. Adjustment: The length of the shoulder rest can be adjusted according to your own holding comfort.

5. Description of functions

5.1 Target recognition function

Using the camera image characteristics of the on-board AI guidance system, aerial targets (including multicopters and fixed-wing aircraft) within the video range are identified. A yellow recognition frame appears on the screen and the target is displayed in a recognition frame with a green border around the target.

5.2 Pre-capture function

When you press the pre-lock mode switch, the color recognition frame on the screen turns red, the target appears in the red frame, and then the target is automatically tracked and recognized for pre-lock (the red recognition frame starts flashing). The target will be re-identified and captured if lost.

5.3 Guidance function

In targeting mode, the recognition frame disappears and a red target frame appears on the screen. Pull the trigger to fire and the guidance system will begin to control the pursuit flight according to the target's position.

6. Installation and use

6.1 Opening the battery compartment and installing the battery

• Step 1: Press the battery compartment latch.
• Step 2: Rotate the battery compartment to the left and pull it back when hitting an obstacle to open the battery compartment.
• Step 3: Install the battery and connect the XT90 terminals. Do not reverse the positive and negative connections as this will burn out all electronic equipment.
• Step 4: Align the battery compartment cover with the notch in the fuselage, insert it and turn it to the right until the battery compartment lock is aligned with the notch in the fuselage, and then press the battery compartment lock until it is flat.

6.2 Using the Aim Screen and Linking

1) Introduction

In frequency group, you can manually set six frequency groups A, B, E, F, R and L, or select Scan to perform frequency search. Select “Scan”, press OK to confirm, activate automatic scan or press and hold up key to auto scan channels. (Note: Auto search can only be used in FPV interface). Supports 48 5.8G frequencies, which can be set to the corresponding frequency through the frequency group and the frequency itself:

	A	E	F	B	R	L
1	5865	5740	5733	5705	5658	5362
2	5845	5752	5685	5760	5695	5399
3	5825	5665	5780	5771	5732	5436
4	5805	5790	5645	5800	5769	5473
5	5785	5820	5885	5809	5806	5510
6	5765	5905	5828	5840	5843	5547
7	5745	5847	5925	5860	5880	5584
8	5725	5866	5945	5880	5917	5621

6.3 Using and pairing a digital receiver (if available)

1) Introduction

1. Anchor buttons
2. Indicator light
3. Record
4. LAN
5. Micro SD card slot
6. RX port
7. Fan
8. Antenna
9. Return key
10. Enter key
11. Direction key
12. Power port
13. 1/4 screw hole
14. USB port
15. HDMI

2) Binding operation

1. Connect the VRX and VTX air module power supplies.
2. After waiting for the device to turn on, press the VRX pairing button to automatically pair.
3. After successful binding, the image transfer screen will appear on the display.

3) Note

1. Before turning on the power, please install all antennas to avoid damage to components.
2. Please make sure that your monitor supports the set resolution and frame rate, otherwise it will result in incorrect display of the picture.
3. If you are using the device with other 5.8G devices at the same time, please select a different channel.

6.4 Pre-flight inspection

1. Please check the exterior of the high-speed drone for damage. If there is damage, check or repair.
2. Please make sure the rotation direction of the propellers is correct and check whether the propeller screws are tight.
3. Make sure the straps secure the battery correctly.
4. Please check the battery voltage. When fully charged, the 8S voltage is 33.6V.
5. Turn on the FPV goggles or screen to check the connection status and make sure the image is normal.

6.5 Connection between high speed drone and transmitter

Align the guide hole of the high speed drone with the guide post in the launch tray and insert it. Insert the high speed drone in the direction shown in the picture and align it with the guide post in the launch tray to complete the connection. Do not bend or insert it at an angle, as this may jam the drone and launch tray, or break the guide post!

7. High-speed drone video interface and tracking and capture logic

By default, a yellow recognition frame is displayed on the screen, and when a target appears in the recognition frame, a green frame surrounds it.

In pre-acquisition mode, the color recognition frame on the screen turns red, the target appears in the red frame, and is automatically tracked and recognized. At this time, the red recognition frame flashes, and the target will be re-identified and acquired after being lost.

In targeting mode, the recognition frame disappears and a red target frame appears on the screen. Once manually unlocked, the guidance system begins to control the pursuit flight according to the target's position.

8. Technical parameters of high-speed UAV

Dimensions	446 mm * 308 mm * 308 mm
Net weight	1.8 kg (including battery)
Maximum payload weight	0.3 kg
Maximum flight time	≥ 3.5 min (Fully loaded, speed 200 km/h)
Maximum level flight speed	350 km/h (Last 10 sec)
Maximum flight range	≥ 10 km
Maximum flight altitude	2 km
Interception mode	Physical collisions and final distance range
Interception Accuracy	KVO (CEP) 2 m
Traction mode	Battery Energy
Launch method	Compatible with manual flight/auto launch interfaces