Servo drive Feetech STS3215

Order the Feetech STS3215 servo drive - precision and power for your drone!

Servo drive Feetech STS3215 is a digital drive for precise control in your projects. It provides high torque and responsiveness. This servo is ideal for drones and robotics. You will receive reliable and accurate command execution. This is the choice for demanding designers and pilots.

Key advantages of the device:

• High torque - 25 kg/cm at 7.4V

• Fast rotation speed - 0.10 sec/60°

• Digital control for precise positioning

• Durable metal gearbox and titanium shaft

• Wide operating voltage range 6.0-7.4V

This servo will become a reliable actuator. It will ensure smooth and precise movement of your drone components. You can trust him to control the camera or other systems.

Operating principle and technical characteristics

The servo receives the signal from the receiver or controller. An internal processor decodes the pulse width. It determines the target output shaft rotation angle. The motor turns the shaft through a gearbox to a given position. Built-in sensor tracks position for accuracy.

A torque of 25 kg/cm indicates high power. The servo is capable of overcoming significant resistance. This allows you to control heavy or loaded elements. You will gain confidence in its power.

The rotation speed of 0.10 seconds per 60 degrees is very high. This ensures an almost instantaneous system response. Your drone will respond quickly to commands. This is critical for dynamic flight conditions.

The supply voltage is 6.0-7.4V from a LiPo or LiFe battery. Digital hardware uses energy efficiently. This reduces overall system power consumption. Your batteries will last longer.

The shaft is made of durable titanium alloy. It is resistant to bending and mechanical stress. This guarantees a long service life of the mechanism. You can rest assured about reliability.

Reliability for professional use

The metal gearbox can withstand high shock loads. It is not subject to gear wear like plastic counterparts. This ensures stable operation throughout the entire service life. Your settings will not be lost over time.

Durable die-cast aluminum housing effectively dissipates heat. It protects internal components from damage. The design is resistant to drone vibrations in flight. This increases the overall reliability of the device.

The servo drive supports standard control protocols. It is compatible with most popular flight controllers. For example, with Pixhawk, ArduPilot and other systems. Integration is quick and hassle-free.

Double ball bearings on the shaft ensure smooth running. They minimize backlash and increase positioning accuracy. This is important for camera guidance systems or antennas. You will get a stable picture without shaking.

Specifications

• Weight: 55 g
• Size: 45.2X24.7X35mm
• Gear: metal gear
• Engine: main engine
• Gear ratio: 1/345
• Horn Type: 25T/OD5.9mm
• Connector and cable: 15 cm, 5264-3p.
• Working temperature: -20～60
• Angle sensor: 12-bit magnetic encoding
• Output voltage: 7.4V
• No-load speed: 0.19s/60°/7.4V
• No-load current: 150 mA
• Stopping torque: 19.5kgcm/7.4v
• Stop current: 2.5A
• Idle current: 6mA
• CT constant: 8 kg.cm/A
• Stroke Angle: 360°（0-4096）
• Neutral position: 180°(2048).