Servo drive FEETECH FB5118M

Order the FEETECH FB5118M servo drive - the optimal combination of speed and power!

Servo drive FEETECH FB5118M is a modern digital drive for your drone. It combines high torque and response speed. This servo drive will ensure reliable operation of critical mechanisms. You will get precise and fast control of additional functions. This is a balanced solution for a wide variety of projects.

Key advantages of the device:

• Powerful torque 18 kg/cm at 7.4V.

• High rotation speed - 0.10 sec/60°.

• Digital control for precise positioning.

• Reliable metal gearbox and double bearings.

• Wide operating voltage range 6.0-7.4V.

This servo drive is an excellent choice for your engineering needs. It will ensure smooth and confident movement of mechanical systems. You will be able to implement functionality that goes beyond flight. Entrust the execution to a proven and efficient device.

Operating principle and technical characteristics

The servo drive receives a digital control signal from the controller. The built-in processor analyzes the width of the received pulse. It calculates the required rotation angle of the output shaft. A powerful brushless motor drives the shaft through a gearbox. The position sensor provides feedback and accuracy.

The torque of 18 kg/cm is an excellent indicator. It allows the servo drive to handle significant loads. For example, control the camera gimbal or reset mechanism. You will have confidence in the strength and reliability of the drive.

The rotation speed of 0.10 seconds per 60 degrees is very high. This provides an almost instantaneous response to control commands. Your mechanisms will work dynamically and without delays. This is important for systems that require fast response.

The supply voltage is 6.0-7.4V from a LiPo or LiFe battery. The digital circuit effectively manages the motor's power consumption. This reduces heat and increases overall system efficiency. You will be able to use the drive in continuous operating modes.

The shaft is mounted on two ball bearings for maximum stability. This eliminates play and ensures smooth running under load. Positioning accuracy remains consistently high. You will get predictable and reliable operation of the mechanism.

Reliability and scope of application

The metal gearbox can withstand severe shock and constant loads. Gears are made of hardened steel for durability. The design is not subject to wear and tear typical of plastic. This guarantees stability of performance throughout the entire service life.

Applications include many tasks on board a drone. Controlling the rotating mechanism of an FPV camera for viewing. Drives for opening flaps or releasing landing supports. Precise positioning of antennas, sensors or manipulators.

The durable aluminum housing effectively dissipates heat. It also protects internal components from mechanical damage. The design is resistant to vibrations that are inevitable during flight. Your drive will operate smoothly in any conditions.

The servo drive is compatible with standard control systems. It easily connects to any free receiver channel. Also works with the outputs of Pixhawk and Matek flight controllers. Integration into your circuit will not require additional modules.

Specifications

• Shaft rotation angle: up to 300°
• Torque: up to 17.5 kg cm at 7.4 V (approx. 15 kg cm at 6 V)
• Swing speed: 60° in 0.167 seconds at 7.4 V
• Supply voltage: 4–8.4 V
• Current consumption: 180 mA (6 V) / 220 mA (7.4 V) no load, peak up to 800 mA (6 V) / 1200 mA (7.4 V)
• Built-in digital controller with feedback via separate wire for precise angle measurement
• Gear material: steel
• Dimensions: 54 × 20.1 × 44.3 mm
• Weight: 65 g.