GPS module GEPRC GEP-M1025I

Order the GEPRC GEP-M1025I GPS module - get speed and accuracy for your copter

Give your drone superior navigation. The powerful GEPRC GEP-M1025I module is designed for this. It provides lightning-fast location detection. You will gain confidence in every flight.

This module will return the drone home automatically. An ideal solution for professionals and amateurs. Forget about the fear of losing your model. Enjoy the freedom of flying without borders.

Five key advantages of the module

• Instant satellite acquisition with the new u-blox M10 chip.

• Simultaneous work with GPS, GLONASS and Galileo.

• High positioning accuracy and reliable compass.

• Compact housing for easy installation on the frame.

• 10Hz refresh rate for up-to-date data.

How does this navigation module work?

The operating principle is based on satellite communication. The module simultaneously connects to several systems. It uses GPS, GLONASS and Galileo constellations. This greatly speeds up the initial capture.

The u-blox M10 chip processes all signals. It calculates exact coordinates and height. The built-in digital compass determines the direction of flight. All data is transmitted to the flight controller.

The module is compatible with popular firmware. For example, with Betaflight, iNAV and ArduPilot. This allows for simple and fast setup. You can easily activate all functions.

The technical specifications are impressive. The supply voltage ranges from 3.0V to 4.5V. The data update rate reaches 10 times per second. This is critical for high-speed flights and autonomous missions.

The module supports NMEA and UBX protocols. The built-in antenna has high sensitivity. Small weight and size will not weigh down your drone. You can install it on any frame.

Use the automatic return home feature. Set up point-to-point flights and autonomous routes. Follow the coordinates directly in the OSD of the glasses. Your flights will be as safe as possible.

Specifications

• Chip: u-blox M10050
• Compass: IST8310
• Input voltage: 3.3-5V
• Frequency: GPS L1, GLONASS L1, BDS B1, Galileo E1, SBAS L1, QZSS L1
• Operation mode: GPS+BDS+GALILEO+QZSS+SBAS joint positioning
• Channels: 72
• Satellites: up to 32 pcs.
• Communication protocol: UART (u-blox) / I2C (compass)
• Output protocol: u-blox
• Baud rate: 115200 bps
• Output frequency: 10Hz
• Speed accuracy: 0.05m/s
• Horizontal positioning accuracy: 2D 1.5m
• Timing accuracy: 30 ns
• Receive sensitivity: trace -162 dBm, capture -160 dBm
• Dynamic characteristics:
• Maximum altitude: 50000 m
• Maximum speed: 500 m/s.
• Maximum acceleration: 4G
• Size: 29 × 29 × 8.5 mm
• Weight: 13 g.