FlySky FS-X6B receiver

Order the FlySky FS-X6B receiver for your FPV drone - a guarantee of fast and stable communication!

FlySky FS-X6B receiver is a modern and compact 6-channel receiver. It provides reliable communication between your remote control and the flight controller. This receiver supports advanced digital transmission protocols. You will get precise control of your FPV drone without any lag. This is an excellent choice for racing and freestyle models.

Key advantages of the receiver:

• Supports SBUS and PPM digital protocols.

• Highly responsive with 11ms refresh rate.

• Long communication range - up to 1500 meters.

• Compact body and two flexible antennas.

• Compatible with AFHDS 2A protocol.

This receiver is the perfect solution for your build. It combines the necessary functionality and light weight. You will be able to fly far and control the drone with confidence. Entrust communication to a proven and popular component.

Operating principle and technical characteristics

The receiver receives a radio signal at a frequency of 2.4 GHz from the transmitter. It works with the state-of-the-art AFHDS 2A protocol for noise immunity. The received data is decoded into commands for the controller. The signal is transmitted via the digital output SBUS or analogue PPM. This ensures fast and precise motor control.

Six control channels give you the freedom you need. The first four are responsible for roll, pitch, throttle and yaw. Two additional channels can be used for useful functions. For example, to switch flight modes or control light.

The signal update rate is only 11 milliseconds. This ensures minimal delay between your action and the drone's response. You will feel the instant and precise response of the device in the air. This is critical for dynamic flights.

The communication range under ideal conditions reaches 1500 meters. This is more than enough for flying FPV drones within visual range. The system automatically selects the least noisy channel. Your control will remain stable even when there is interference.

The receiver supply voltage is from 4.5 to 10 volts. It can be connected to a flight controller or via BEC. The current consumption is very low, which saves battery energy. This is important for increasing overall flight time.

Reliability and features of use

Compact size and weight make it easy to mount on a drone frame. Two dipole antennas provide reliable signal reception. It is recommended to place them at a 90 degree angle for better coverage. The antennas are protected by a flexible shell, which increases their durability.

The receiver is fully compatible with FlySky X series transmitters. For example, with the popular and affordable FS-i6X and FS-i10 models. The pairing process is performed by pressing one button. You can quickly and easily set up communication between devices.

SBUS protocol support is a big advantage. SBUS transmits all channels over one wire. This greatly simplifies wiring and reduces assembly clutter. Modern flight controllers work great with this format.

The model is great for racing drones, freestyle and aerial photography. It provides the necessary speed and reliability for these tasks. The receiver has been tested by the community and has proven its effectiveness. This is an inexpensive way to improve your device's connectivity.

The durable housing protects the internal board from vibrations and light impacts. The components are assembled with high quality and coated with a protective varnish. This increases resistance to moisture and ensures long service life. Your investments will be reliably protected.

Specifications

• Frequency: 2.4 GHz (AFHDS 2A)
• Number of channels: 6 PWM / 8 PPM / up to 18 i-BUS
• Signal types: PWM, PPM, i-BUS
• Power: 4 - 8.4 V
• Range: 300–1500 m in the air
• Dimensions: 36 × 22 mm
• Weight: 4.5–5 g
• Antennas: double, length 93 mm, IPEX connector.