ESC regulator XXD 30A

Choose the affordable and reliable XXD 30A ESC controller for your model!

Gain confident control over the power of your aircraft or drone without breaking the bank. The XXD 30A regulator is a budget-friendly and proven solution for radio-controlled models. It can withstand 30 amps continuous current and up to 40 amp peak loads for 10 seconds .

The device supports a wide voltage range from 2S to 4S LiPo. You will be able to power the motors and get stable operation in different modes. This is an ideal choice for educational models and first DIY assemblies. Choose affordability and functionality from the XXD brand. Order your regulator right now in our store.

• High power 30A DC and 40A peak for most hobbyist models.

• Built-in 5V/2A BEC to power receiver and servos without a separate battery.

• Supports wide input voltage range 2-4S LiPo or 5-12 NiMH .

• Lots of programmable features for flexible customization to suit your flying style.

• Full protection functions against overheating, signal loss and low voltage .

Operating principle and design

The XXD 30A regulator is an electronic device for controlling the rotation speed of brushless motors. It receives signals from the receiver and converts them into voltage on the motor windings. The built-in microprocessor provides precise response to throttle commands and supports a maximum rotation speed of up to 210,000 rpm for 2-pole motors . The device is equipped with a safety start feature that prevents accidental starting of the motor when the battery is connected.

The design includes a built-in linear BEC voltage regulator. It produces a stable 5 volts with a current of up to 2 amps to power the receiver and servos . This simplifies the circuit and reduces the weight of the model, eliminating the need for a separate battery for on-board electronics. Compact dimensions and low weight make it easy to place the regulator even in limited fuselage space.

Functionality and technical characteristics

Study the detailed parameters of the XXD 30A regulator. The DC current rating is 30 amps. Peak current reaches 40 amps within 10 seconds . Input voltage 2 to 4 LiPo cells (7.4-14.8 V) or 5-12 NiMH .

The controller offers extensive programming possibilities. You can configure the battery type (LiPo or NiMH), brake operating mode, start type (normal, soft, very soft), timings and low voltage protection thresholds. LiPo cutoff thresholds are adjustable to 2.6V, 2.85V, or 3.1V per can.

The overall dimensions of the device are approximately 36 mm in length, 26 mm in width and 7 mm in height. The regulator weighs 32 grams. Built-in protections include overtemperature shutdown, power reduction or signal loss shutdown, and low voltage protection. It is recommended to calibrate the gas range for precise control before first use.

Specifications

• Input Voltage: 6-16.8V DC (2-4 with Lixx)
• BEC: 5 V, 2 A
• Operating current: 30A (Output: continuous 30A, pulse current 40A up to 10 seconds.)
• Size: 36mm(L)*26mm(W)*7mm(H).
• Weight: 32 g.