ESC regulator Sunnysky X Series ESC 100A

Buy a powerful Sunnysky X Series ESC 100A regulator for your aircraft model!

Give your model reliable and precise power control. The Sunnysky X Series ESC 100A is designed for medium to large sized airplanes and helicopters. It can handle 100 amps of continuous current and up to 120 amps of peak loads.

The device supports a wide voltage range from 2S to 6S LiPo. You will be able to power powerful motors and get stable operation in any mode. It is an ideal choice for sports and aerobatic models. Choose quality and reliability from the Sunnysky brand. Order your X Series ESC now from our store.

• High power 100A DC and 120A peak for 30 seconds.

• Supports wide input voltage range 2–6S LiPo (7.4–22.2V).

• Built-in BEC 5.6V/7.4V with current up to 8A to power the flight controller and servos.

• Versatility with support for airplane and helicopter modes with governor function.

• Convenient programming via LCD card or Bluetooth module.

Operating principle and design

The Sunnysky X Series ESC regulator is an electronic device for controlling the rotation speed of brushless motors. It receives signals from the receiver or flight controller and converts them into voltage on the motor windings. The built-in microprocessor instantly processes the pilot's commands and ensures perfect rotation synchronization. For aircraft, a fixed speed governor mode is available, which stabilizes the speed when the load changes. For helicopters, special throttle curves and flight modes are implemented.

The device is equipped with a powerful built-in BEC voltage stabilizer. It produces a stable 5.6 or 7.4 volts with a current of up to 8 amperes. This is enough to power the flight controller, receiver and several servos. Built-in protection against overvoltage, overload, overheating, signal loss and low voltage ensure safe operation.

Specifications and programming

Study the detailed parameters of the Sunnysky X Series ESC 100A regulator. The continuous current rating is 100 amps for 30 seconds. Peak current reaches 120 amperes. Operating voltage 2 to 6 LiPo cells (7.4–22.2 V).

The built-in BEC outputs 5.6V or 7.4V with a maximum current of 8 amps. The dimensions of the device are approximately 81 × 37 × 22.8 mm. Weight about 144 grams. Operating temperature from -20 to +60 degrees Celsius.

The controller supports programming via a special LCD card. An optional Bluetooth module is also available for configuration from a smartphone. You can adjust timings, throttle curves, braking force and other parameters.

Areas of application and operation

The Sunnysky X Series ESC 100A is ideal for high-performance aerobatic aircraft. It works great on sports models with high loads. Used in medium-sized helicopters with a speed governor function. Suitable for experimental and semi-copy models. This is the choice of pilots who require maximum reliability.

For correct operation, use high-quality connectors and wires of sufficient cross-section. Provide good airflow to the regulator for efficient cooling. Before your first flight, perform a throttle range calibration. Adjust BEC settings to match your equipment voltage.

Specifications

• Rated current: 100 A constant (30 s)
• Peak current: up to 120 A
• Operating Voltage: 2-6S LiPo (or 6-14S for some models)
• Built-in BEC: 5.6V/7.4V, 8A
• Support modes: airplane, helicopter (with governor function)
• Programming interface: LCD card or Bluetooth module
• Protection: overvoltage, overload, overheating, signal loss, low voltage
• Dimensions: about 81 × 37 × 22.8 mm
• Weight: about 144g
• Operating temperature: -20°C to +60°C.