Engine Freerchobby 6354

Order the Freerchobby 6354 motor - professional power for large multicopters

The Freerchobby 6354 engine is a powerful power unit for industrial drones. It's designed for heavy lifting and tough tasks. This motor provides high torque and reliable operation. You will gain stability and endurance in the most challenging conditions. It is the choice for professional platforms and commercial projects.

Key advantages of the motor

• Large stator size 63x54 mm. Guarantees enormous power and torque.

• Low KV value for working with large screws. Provides high traction and efficiency.

• Rugged design with efficient cooling. Withstands long-term loads without overheating.

• Designed for high-voltage batteries 6-12S. Operates over a wide voltage range.

• High quality build and components. Provides long service life and reliability.

The essence of the work and design

This is a large size external rotation brushless motor. The operating principle is based on the interaction of magnetic fields. The ESC controller supplies three-phase current to the stator windings. The generated rotating magnetic field interacts with the rotor magnets. This generates powerful torque at relatively low revs. The large stator allows the use of thick wire in the windings.

Technical characteristics and scope of application

The Freerchobby 6354 engine is a serious unit for heavy equipment. The specific KV value depends on the modification (often in the range of 200-400). The operating voltage covers the spectrum from 22.2V (6S) to 44.4V (12S). The maximum power can reach several kilowatts. It is designed to work with large diameter propellers (16-22 inches).

This motor is the basis for heavy cargo multicopters. It is used in agriculture for spraying fertilizers. It is also used in aerial photography systems with full-frame cameras. It is chosen for building powerful long-range FPV platforms. An appropriate powerful ESC (80A and above) is required for operation.

Installation requires a strong frame and reliable fasteners. Use quality screws and be sure to use thread locker. Proper selection of propeller and battery is critical. Load mismatch may cause overheating and failure. Always follow the manufacturer's recommendations for combinations of components.

Regular maintenance is mandatory for such a motor. Check the temperature after every load flight. Monitor the condition of the bearings and the cleanliness of the windings. Clean the engine from dust, dirt and chemicals in a timely manner. Correct ESC setting affects smoothness and efficiency.

Specifications

• Size: 63 mm x 54 mm
• KV:465
• Maximum torque: 6 Nm
• ESC: VES6.6
• Li-po: 8C-10C
• Peak current: 75A
• Continuous current: 75A
• Idling current: 1.7A.