Case power supply Argut PS-150K

Order a power supply with UPS Argut PS-150K for your radio station!

Ensure continuous operation of your equipment. The Argut PS-150K case power supply is a reliable source. It combines a stabilized power supply and a UPS. The device produces a stable 12 Volts DC. This is necessary for fixed radio stations and repeaters. Your connection will not be interrupted if there is a power outage. Choose a professional solution for mission-critical systems. Buy Argut PS-150K for complete peace of mind.

• Built-in uninterruptible power supply (UPS).

• Stable output voltage 12V with load up to 150 W.

• Automatic switching to backup battery.

• Overload and short circuit protection.

• Compact design for easy placement on your desk.

Working principle and uninterruptible power supply function

The PS-150K power supply performs two key functions. In normal mode, it operates from a 220 Volt network. The device converts alternating current into direct current. It stabilizes the voltage at 12 Volts. This current powers the connected radio equipment.

When the mains voltage is turned off, the UPS is activated. The device instantly switches to the backup battery. The external battery is connected to special terminals. The radio station continues to work without the slightest interruption. After the network is restored, the unit charges the battery again.

Technical characteristics and functionality

Check out the exact parameters of the PS-150K unit. The nominal output voltage is 13.8 VDC. The rated output current reaches 12.5 Amps. The maximum output power is 150 watts.

Input voltage from the network is 220 Volts, 50 Hz. 12 Volt batteries are used for backup. Recommended battery capacity is from 7 to 100 Ah. The unit has a built-in deep discharge protection system. It saves your battery from breakdown.

Overall dimensions: 220 x 150 x 75 mm. The case is metal with perforations for cooling. There are LED indicators on the front panel. They show the presence of a network and the operating mode from the battery. There is also a fuse to protect the equipment.

Compatibility and Applications

This block was created for stationary radio equipment. It is ideal for the Argut A-1000D radio station. Also for DR-40 DMR and DR-50 DMR repeaters. It will provide power to the RoIP-04 radio gateway. This is the basis for a control center of any complexity.

The device is indispensable where uninterrupted operation is important. It is installed in headquarters and situation centers. Used at control centers of taxi services. Used in industrial and security communication systems. The unit guarantees operation in emergency situations.

The connection is made via screw terminals. The red wire is positive, the black wire is negative. The battery is connected to separate terminals. Make sure the connection polarity is correct. Always use a fuse of the recommended rating.

Specifications

• Manufacturer: Argut
• Power: 150 W
• Supply voltage: 88-264 V
• Display: Yes
• Dimensions (L×W×H): 175×215×315 mm
• Operating temperature range: -25…+70 °C
• Operating frequency: 50 Hz.