Video receiver FPVspeed VRX FS1022RX

Buy the FPVspeed VRX FS1022RX video receiver for a stable analog signal over long distances

The FPVspeed VRX FS1022RX video receiver is a compact DIY module designed to receive analog video signals in the range of 1080–2200 MHz. The model is designed for pilots who value low latency and noise immunity over long distances. The receiver provides clear video transmission to FPV goggles or a monitor, making it an excellent choice for long range and racing drones.

• Frequency range 1080–2200 MHz for flights beyond visual line of sight.
• High sensitivity -95 dBm for a stable signal over long distances.
• SPI support and RSSI output for flexible integration and signal level monitoring.
• Low video latency for precise control in dynamic flights.
• Compact size and light weight for installation in any FPV system.

How the FPVspeed VRX FS1022RX video receiver works

The receiver picks up an analog radio signal from the drone's video transmitter (VTX) in the 1080-2200 MHz range. The built-in tuner converts it into a composite video signal (CVBS) and outputs it to FPV goggles or a monitor. High sensitivity -95 dBm ensures clear images even at long distances.

SPI support allows you to integrate the module into various systems and configure parameters for specific tasks. The RSSI output gives the pilot information about the received signal strength in real time. The module is compatible with PAL and NTSC video systems.

Specifications

Model FS1022RX operates in the frequency range 1080–2200 MHz. Receiver sensitivity is -95 dBm. SPI interfaces and RSSI output are supported. The module is designed for integration into FPV systems as a DIY component.

About the manufacturer FPVspeed

FPVspeed is a Chinese company founded in 2012 in Shenzhen. The brand specializes in the development and production of independent wireless video modules for FPV systems. FPVspeed products are known for high performance and innovation, especially in the field of drone racing. The company offers a wide range of VTX and VRX modules for various frequency ranges - from 1.2 GHz to 10 GHz.

• Model: FPVspeed FS1022RX (Version V1.2)
• Type: FPV receiving module for DIY.
• Frequency range: 1080 – 2200 MHz
• Sub-band 1 (S2=H, S3=L): 1080–1700 MHz
• Sub-band 2 (S2=L, S3=H): 1720–2200 MHz
• Sensitivity: -95 dBm ±3 dBm
• Video output: CVBS, 1.0 V ±0.2 V, 75 ohms, negative polarity.
• RSSI output: Analog voltage (see dependency table).
• Power: 5.0V DC (requires stable power supply).
• Current consumption: 420 mA ±30 mA.
• Antenna connector: Solder pin, impedance 50 Ohm.
• Control interface: SPI (CLK, DATA, LE) / Channel switching standby mode.
• Dimensions (LxWxH): 37 x 26.3 x 4.5 mm.
• Weight: 5.5 g ±0.1 g.