FlySky FS-X8B receiver

Order the FlySky FS-X8B receiver for FPV drone - your extended control in flight!

FlySky FS-X8B receiver is a powerful 10-channel receiver for professional monitoring. It provides reliable communication between your controller and the drone. This receiver supports modern data transmission protocols. You will get precise and fast control of any model. This is an ideal solution for complex projects and advanced pilots.

Key advantages of the receiver:

• 10 control channels for complex configurations.

• Supports SBUS and PPM protocols for compatibility.

• Highly responsive - 11ms refresh rate.

• Reliable communication via AFHDS 2A protocol.

• Compact housing and flexible antenna for easy installation.

This receiver will open up new possibilities for your drone. It allows you to control not only the flight, but also additional functions. You can configure the camera, lights or mechanical servos. Entrust control to a proven and powerful system.

Operating principle and technical characteristics

The receiver receives a radio signal at a frequency of 2.4 GHz from the transmitter. It decodes the digital signal of the AFHDS 2A protocol. The data is converted into commands for the flight controller. The controller distributes signals to motors and servos. Your actions are accurately transmitted to the drone without delay.

The key feature is support for 10 control channels. The first four channels are responsible for basic flight functions. The remaining six channels can be assigned to additional actions. For example, controlling the camera gimbal or flight modes.

The response speed is only 11 milliseconds. This ensures the drone's response is almost instantaneous. You will feel full control over the aircraft in dynamic flight. This is important for racing, freestyle and precision maneuvers.

The receiver supports two main signal outputs. The SBUS digital output transmits all channels over one wire. The PPM analog output also combines channels into one stream. This makes it easy to connect to modern flight controllers.

The supply voltage ranges from 4.5V to 10V. The receiver can be connected to a BEC regulator or flight controller. It features low power consumption during operation. This will not put a strain on your drone's on-board network.

Reliability and scope of application

The communication range of the receiver reaches several hundred meters. The exact value depends on the environmental conditions. The system automatically scans frequencies to find a clear channel. This ensures a stable signal even in the presence of interference.

Compact size and weight make it easy to install on a drone. Two flexible antennas can be separated at an angle of 90 degrees. This improves signal reception at any position of the drone in the air. The antennas are reliably protected by a silicone shell.

The receiver is fully compatible with FlySky X series transmitters. For example, with the popular FS-i6X and FS-i10 models. The pairing process is performed with one button. You will quickly set up a connection between the remote control and the receiver.

The model is perfect for quadcopters, airplanes and helicopters. It can be used in ground models and robotics. Its versatility makes this receiver a great choice. It is suitable for most hobby projects.

The rugged housing protects the internal electronics from vibration. It also protects the board from dust and condensation. This increases the overall reliability of the device in various conditions. Your control will remain stable.

Specifications 

• Frequency range: 2.408-2.475 GHz
• Bandwidth: 500 kHz
• Number of straps: 135
• Transmit power: <20 dBm (EU)
• Receiver sensitivity: - 92 dBm
• 2.4 GHz protocol: AFHDS 2A
• Modulation: GFSK
• Transfer method: FHSS
• Channel latency: <15ms
• Antenna length: 93mm (dual antenna)
• Input power: 4V
• Display: LED indicator
• Online update: no
• Range without interference 1m from the ground: more than 300m.
• Channel data: 1500 µs
• Range: 1000 ~ 2000 µs
• Size: 32*22*7mm
• Weight: 3.7 g.