Charger Junsi iCharger DX8

Buy a professional Junsi iCharger DX8 charger for your batteries!

The Junsi iCharger DX8 charger is a high-tech station for professional battery maintenance. It provides accurate, safe and fast charging for a wide range of battery types. This device is a must have for drone pilots, modelers and engineers. With it you will get full control over the condition and life cycle of your batteries.

• High power and the ability to charge multiple batteries in parallel.

• Supports all modern battery types: LiPo, LiHV, LiFe, NiMH, Pb.

• Intelligent balancing system for each can with high accuracy.

• Large informative color display and convenient control menu.

• Reliable protection against all types of user errors and network failures.

The essence of the work and the principle of intellectual charge

The device converts alternating current from the network to direct current. Then, according to a given algorithm, it supplies it to the battery. The built-in balancer equalizes the voltage on each battery bank. The processor constantly monitors current, voltage and temperature. When the specified parameters are reached, charging automatically stops.

Specific functionality and technical characteristics

Model iCharger DX8 has a power of 800 W. It can deliver a charging current of up to 30 A when operating from a 220V network. The device supports charging batteries with a voltage of 1 to 8 consecutive cells (S). For lithium batteries, this means working with voltages from 3.7V to 33.6V.

The charger has a built-in power supply. You don't need to buy an external unit separately. This simplifies use and makes the station mobile. You can easily take it with you to competitions or field trips.

An important feature is the advanced balancing system. It uses an active discharge balancing method with a current of up to 1.3 A. This ensures fast and accurate voltage equalization across all banks. Your batteries will always be in perfect condition.

Device and specifics

The device is equipped with a color TFT display with a resolution of 320×240 pixels. It displays all charge parameters in real time. Control is carried out through ergonomic buttons and a well-thought-out menu. This makes the setup process simple and straightforward.

The charger supports many operating modes. The main modes are charge, discharge, storage and cycle. Storage mode automatically brings battery voltage to the optimal level. This is necessary for long-term and safe storage of lithium batteries.

There is a USB interface for connecting to a computer. Special software allows you to build graphs and analyze the process in detail. You can save charge profiles for different battery types. This saves time during daily use.

You can buy the Junsi iCharger DX8 charger in the COPTERPARTS online store. We offer original products with a manufacturer's warranty. Our specialists will provide detailed advice on setup. You will receive a professional tool for working with batteries.

Correct configuration is mandatory for safety. Always check the battery type and number of cells. Set the charging current in accordance with the battery capacity. Do not leave the process unattended for a long time. Use fireproof lipo bags.

Update your device's firmware regularly. The manufacturer releases updates to improve performance. New versions may add support for additional features. Check the Junsi website for the latest firmware.

Choose equipment with power reserves. The iCharger DX8 is suitable for the most demanding applications. It can handle charging large batteries for powerful drones. This is a reliable investment in your hobby or work. The device will serve you for many years.

Specifications

• Input voltage: 9-49 VDC
• Maximum charging current: 30 A per channel (50 A in synchronous mode)
• Maximum charging power: 1100 W per channel (1600 W synchronous)
• Supported batteries: LiPo, LiIon, LiFe, LiHV, LTO, NiZn, NiMH, NiCd and Pb
• Number of cells: up to 1-8S for lithium batteries, up to 25S for NiMH/NiCd
• Balanced current: 2 A per channel, 4 A synchronous
• Max. Discharge power: 45 W per channel (70 W in synchronous mode), can be increased from external
• load up to 2100 W
• Supports regenerative discharge mode
• Interface: USB Type-C with support for charging mobile devices (5V/3A, 9V/2A, 12V/1.5A), slot for
• microSD for logs and updates
• Screen: 2.4″ IPS LCD with information about current, voltage, power, capacitance, internal resistance and
• temperature
• Protection: against polarity reversal, overvoltage, overload, overheating, etc.
• Built-in temperature-based fan control
• Weight: 440 g
• Dimensions: 97.5 × 128.5 × 40 mm.