1 products
Popular models: Buzzer JHEMCU JHE42B
Never lose your drone due to a dead battery. JHEMCU buzzers are compact sound alarms for quadcopters. They give clear sound signals about the status of the device. These devices are critical to the safety and convenience of piloting. You will always know where your drone is in the long grass.
Loud and clear sound signal to quickly find the drone.
Ultra-low power consumption in standby mode.
Compact size and minimal weight for any build.
Built-in battery for operation when the main battery is disconnected.
Easy integration with any flight controller via a separate wire.
JHEMCU buzzers are the “voice” of your copter. Its main task is to convert electrical signals into sound. The flight controller controls the boomer, completing the circuit. When voltage is applied, the sound emitter inside the housing vibrates. This creates a loud, often shrill sound of a certain pitch.
The device performs two key functions. Firstly, it signals events during flight. For example, low battery voltage or loss of signal. Secondly, it works as a beacon for searching for a fallen device. After turning off the main power, the buzzer continues to beep. This allows you to find the drone in bushes or tall grass.
The JHEMCU range includes several popular models. The classic solution isJHEMCU JB-01. This is an active buzzer with a built-in Li-Po battery. Its capacity is enough for several hours of continuous squeaking. The device is connected by two wires: signal and ground.
The sound pressure reaches 85 dB, which is very loud. The operating voltage of the signal input is 3.3V or 5V (depending on the version). Current consumption in active mode does not exceed 30 mA. The weight of the device is only a few grams.
More advanced model -JHEMCU JB-03. It has increased volume (up to 90 dB). It also has built-in protection against overdischarge of its own battery. Some versions support the ability to program melodies. This allows you to customize unique sound alerts.
There are also passive buzzers (without their own battery). They are simpler and cheaper, but perform only the first function. Such models only beep when main power is available. They are useless for searching for a fallen drone.
Connecting a boozer is incredibly simple. One wire is connected to any free GPIO pin of the controller. The second wire is to ground (GND). This pin is activated in the controller software settings (Betaflight, INAV). Assigned as "Beeper" or "Buzzer".
Next, the trigger conditions are set in the configurator. You can choose dozens of different events. Low main battery voltage (Cell or Total voltage). Loss of signal from the control panel (RX Loss). Enabling the special “Search” mode from the remote control (Beeper on AUX switch).
When any of these conditions are met, the controller will generate a signal. The assigned control pin will be energized. The boozer will make a specific sequence of sounds. Experienced pilots determine by ear what exactly happened.
The importance of the boozer is difficult to overestimate. During the flight, it provides instant audio communication. No need to be distracted by OSD or glasses telemetry. By the characteristic squeak you will understand that the battery is running low. This protects against a sudden fall due to a full discharge.
After an accident or a forced landing in difficult terrain, a boomer is a salvation. You can turn off the remote control and main battery on the drone. But the buzzer will continue to send signals for a long time. It is much easier to follow the sound than to search visually.
For racing pilots, the boozer is useful when crashing on the track. Marshals will find and pick up the device faster. This reduces downtime during competitions.
The choice depends on your priorities and the type of drone. For tiny whoop drones, minimal weight is important. The smallest and lightest model will do. For long-distance flights beyond line of sight, volume is critical. Choose a model with the highest sound pressure (dB).
Be sure to check voltage compatibility. Most flight controllers provide 3.3V or 5V on the GPIO. Make sure your boozer is rated for this voltage.
Having a built-in battery is key. If you need a search beacon, take only the active model (like the JB-01). A passive buzzer will not help you find a drone with a disconnected battery.
Also consider the mounting method. Most often, the buzzer is glued to double-sided tape. Or it is attached with a small screw to the frame or board.