2 products
Popular models: Microcontroller atmel 89C51CC03CA-UM 1941KWC, Microcontroller Atmel 89C51CC03UA-UM 2216J9
Collecting or repairing the brains of your drone? Atmel microcontrollers are a classic and reliable choice for avionics. These AVR family chips (such as ATmega) have been used in autopilots for decades. They control the motors in the ESCs. They also process data in compact flight controllers. Their stability and predictability have been tested in thousands of projects. These chips became the basis for many well-known firmware. For example, it was on them that the first versions of MultiWii and Arduino were born.
The assortment of the aegisky store includes popular models of Atmel microcontrollers. These are the key components to create or restore functionality. They are suitable for amateur and semi-professional projects. Thanks to the open architecture, their possibilities are almost limitless. You can program them to suit your unique needs. This is the foundation on which the intelligence of your UAV is built.
High reliability and time-tested architecture. Microcircuits are known for their stability. They will not let you down at the critical moment of the flight.
Excellent performance to power consumption ratio. The chips perform tasks efficiently with low current consumption. This is important for the autonomy of aircraft.
Huge community support and plenty of documentation. Thousands of libraries and code examples have been written for them. The solution to almost any problem has already been described on the forums.
Perfect compatibility with the Arduino platform and its clones. This makes prototyping and programming much easier. You can use a convenient development environment.
Wide range of I/O and peripheral options. A sufficient number of digital and analog ports (GPIO, PWM, ADC). There is support for I2C, SPI, UART buses for communication with sensors.
A microcontroller is a single-chip computer that controls hardware. In the flight controller, it continuously polls the sensors (gyroscope, accelerometer). Then it executes stabilization algorithms (PID controllers) hundreds of times per second. Based on the calculations, control PWM signals for the motors are generated. In ESC, its task is to decode the signal from the FC and switch the power switches. This creates a rotating magnetic field in the brushless motor.
The work is based on the cyclic execution of programmed instructions. The microcontroller reads the state of the ports and performs calculations in the processor core. Then updates the state of the output ports and timers. The speed of this cycle determines the performance of the entire system. For real-time problems, predictable timing is critical. The AVR architecture does this very well.
The most popular UAV series in the world are ATmega328P, ATmega2560, ATmega32U4. They differ in the amount of flash memory (from 32 KB), the number of pins and peripherals. The ATmega328P is the heart of classic Arduino Nano/Uno and many ESCs. ATmega2560 with a large number of ports is found in boards like Arduino Mega. ATmega32U4 has built-in USB support, which is convenient for creating programmable devices.
Technical parameters include clock frequency, typically 16 or 20 MHz. The operating voltage is 3.3V or 5V. The number of PWM (PWM) channels is 6 or more, which is important for controlling motors. Availability of ADCs (analog-to-digital converters) for reading data from analog sensors. Supports hardware interrupts for instant response to external events.
These microcontrollers are indispensable for DIY ESC assembly or repair. They are the basis for custom flight controllers and telemetry. They are also used in various service devices (for example, programmers). A huge community guarantees assistance in development.