Receiver DumboRC P6DC

Buy a universal 6-channel receiver DumboRC P6DC with an integrated light control system!

Give your RC car or crawler model realistic lighting and reliable control. The DumboRC P6DC receiver is equipped with a built-in light control system that simulates the operation of headlights, brake lights and turn signals. The device operates on noise-resistant FHSS technology with 67 channels of pseudo-random frequency hopping.

A wide power supply range from 4.8 to 10 V allows it to be connected to various on-board systems. Choose a quality solution for realistic control.

• Built-in light control system. Supports connection of daytime running lights, brake lights, turn signals, reversing lights and hazard lights .

• Automatic light dynamics. The brake lights come on when you brake, the turn signals respond to the steering, and the reverse light comes on when you're driving backwards .

• 6 control channels. Sufficient for connecting steering gear, speed controller and additional equipment.

• Noise-proof communication. FHSS technology with 67 channels provides a stable signal over 400 meters .

• Wide power supply range 4.8–10 V. Compatible with various batteries and BEC regulators.

Operating principle and functionality

The DumboRC P6DC receiver operates at a frequency of 2.4 GHz using the GFSK protocol with pseudo-random frequency hopping (FHSS) technology. This ensures stable communication without interference, even when several models are working simultaneously. The integrated light control system receives signals from the steering and throttle channels, automatically activating the corresponding lighting effects. For example, brake lights come on when you brake, and turn signals come on when you turn the steering wheel.

There are separate ports for connecting LEDs: DRL (daytime running lights), SL (brake light), CL (turn signals), BL (reversing light) and FL (hazard warning lights). When connecting LEDs, use external resistors, as there are no resistors on the receiver board.

The P6DC receiver (non-gyro version) is ideal for installation in cars, crawlers and boats where realistic lighting is required. Thanks to its compact body and low weight, it fits easily into any compartment. The binding procedure is simple: insert a jumper into the BIND connector, turn on the power, and then activate the transmitter. A green LED that stops blinking will confirm successful pairing.

Specifications

• Channel: 6 channels
• Voltage range: 3.3-10V
• Working current: 30mA
• Modulation mode: GFSK
• Spread Spectrum: FHSS
• Control distance: more than 400 meters
• Support HV servo drive, the maximum servo voltage is 10V.
• Weight: 9 g.