Battery GensAce Tattu LiPo Battery 6s1p HV 22.8V 32000mAh 10C

Order the GensAce Tattu LiPo HV 22.8V 32000mAh battery - choose record autonomy!

The GensAce Tattu LiPo Battery 6s1p HV 22.8V 32000mAh 10C is the solution for ultra-long flights. This battery provides unprecedented autonomy for heavy quadcopters. It is designed for professional aerial photography platforms and inspection drones. You will be able to complete long missions without changing the battery. It is the choice for serious commercial and industrial applications.

This model uses advanced High Voltage (HV) technology. It allows cells to be charged to a higher voltage of 4.35V. This gives an increase in overall energy intensity and power. Your drone will get more power for the same size and weight. Tattu brand build quality guarantees reliability and long service life.

• Huge 32000mAh capacity for maximum flight time.

• High Voltage (HV) technology for increased energy efficiency.

• Professional build quality from market leader Gens ace Tattu.

• Powerful connectors and reliable internal switching for high currents.

• Specializing in powering heavy industrial drones and multicopters.

How does this high voltage battery work?

The battery consists of six cells connected in series. Each cell uses special LiPo HV chemistry. It allows you to safely charge the cell to a voltage of 4.35V instead of the standard 4.2V. This increases the total voltage of a fully charged battery to 26.1V. This voltage reserve gives more power to the power plant.

It is important to use a compatible charger. It must support LiPo HV charging mode. Otherwise, you will not unlock the potential of this battery. When charged correctly, you get more energy per cycle. This directly increases the time your drone stays in the air. Battery life remains high.

The technical characteristics of this model are unique. Rated voltage 22.8V (6S). The maximum full charge voltage in HV mode is 26.1V. 32000 mAh capacity provides hours of continuous use. A 10C discharge rating corresponds to a maximum current of 320 amps. The weight of the battery is significant and is only suitable for large devices.

Functionality and features

The battery functionality is designed for long-lasting operation. It is not intended for racing drones with high current output. Its element is the smooth flight of a heavy vehicle with a payload. It is an ideal power source for survey drones and mapping platforms. The battery is also suitable for inspecting main pipelines and power lines.

The quality of workmanship corresponds to a professional level. The battery has a durable case made of thick heat shrink. Internal connections are made with powerful busbars for minimal losses. XT90 or similar connectors are designed for high operating currents. A balancing connector is provided to control each element. Built-in overdischarge protection enhances safety.

The operation of such a battery requires attention. To charge, you need a special charger with LiPo HV mode. It is required to strictly monitor the cell balance due to the high capacity. Overdischarge below the minimum voltage threshold should not be allowed. Storage and transportation must take into account the large weight and dimensions. Proper care guarantees hundreds of stable cycles.

The battery is compatible with heavy drones and multicopters. Before purchasing, make sure your platform is designed to withstand the stress and weight. Check that the battery can be placed on the frame or in the compartment. Make sure your charging and discharging system supports these parameters. This is a key component for large-scale tasks.

Specifications

• Capacity: 32000 mAh
• Configuration: 6S1P / 22.8V / 6 cells
• Discharge rate: 10C
• Maximum serial discharge rate: 20C
• Net weight: 3494g ± 30g
• Dimensions: 61*125*216 mm
• Balancer Connector Type: JST-XHR

Connector options to choose from - XT90-S (manufacturer part number TA-10C-32000-6S1P-HV-XT90-S; TAA32K6S10XT9) or XT150+AS150 (manufacturer part number TA-10C-32000-6S1P-HV-AS150; TAA32K6S10ASX)