Stack DarwinFPV Cement Ultra Durable F4 60A

Order the DarwinFPV Cement Ultra Durable F4 60A stack - an indestructible device for your drone

Build the most reliable drone for aggressive racing and freestyle. The DarwinFPV Cement F4 60A stack combines a controller and regulators. The durable lacquered body protects against shock and moisture. Your copter will withstand any hard landings. This is a ready-made solution for the most extreme flights.

This kit is designed for pilots who are not looking for compromises. It combines high performance and exceptional durability. You will be able to fly without fear of damaging electronics. Each component has undergone strict quality control. It's your choice for uncompromising flying.

Five main advantages of a stack

• Full protection of the case with durable varnish. Protects boards from moisture, dust and shock.

• Powerful 4-in-1 ESC regulator 60A. Provides stable power to motors.

• Advanced flight controller on F4 processor. High data processing speed.

• Integrated vibration suppression system. Guarantees accurate operation of the gyroscope.

• Easy to install and configure. All the necessary connectors are already wired.

How does this stack work?

The flight controller processes signals from the console and sensors. It calculates the necessary adjustments for stabilization. The commands are then transmitted to the ESC controller. It precisely controls the power of each motor. The drone follows your movements smoothly and accurately.

Both modules are perfectly optimized to work together. This ensures minimal control delays. Your drone will respond instantly to commands. Even in the most difficult flight conditions.

Technical characteristics and functionality

The stack consists of FC F435 and ESC 4-in-1 60A. The STM32F405 processor works with the ICM-20689 gyroscope. The regulators support DShot1200 and Proshot protocols. Operating voltage from 2 to 6S LiPo (7-26V). Direct current 45A per channel.

The dimensions of both boards are 36x36 mm. This is the standard for 30x30mm mounting. The weight of the set is only 24 grams. All components are protected with a double layer of varnish. The connectors are gold plated for reliability.

The stack supports all modern telemetry features. You can monitor current, voltage and temperature. Setup is done through the Betaflight interface. Optimized settings presets are preinstalled.

General characteristics

• Model: DarwinFPV Cement Ultra Durable F4 60A Waterproof Stack
• Input Voltage: 3-6S LiPo
• Mounting hole dimensions: 30.5×30.5mm
• Dimensions: 39.5×39.5×15.5mm
• Weight: 35.4g

Flight Controller (FC)

• Model: Cement ultra-durable F4 waterproof fc
• Main chip: AT32F435
• Gyro: MPU6000
• OSD: AT7456E
• Black box: 16M
• Barometer: No
• Bluetooth: No
• Receiver: No
• Input Voltage: 3-6S LiPo
• BEC: 10V/3A, 5V/3A
• USB: 1× USB Type-C, waterproof
• Motor output: M1-M4
• Serial port: UART1, UART2, UART3, UART5, UART7
• Soft serial port: No
• I2C: 1× I2C
• USER: No
• RSSI: No
• RGB: 4× RGB soldering
• Buzzer: 1× BB-
• Firmware: DARWINF435 (BetaFlight)
• Mounting hole dimensions: 30.5×30.5mm
• Dimensions: 39.5×39.5mm
• Weight: 11g

ESC

• Model: Cement ultra-durable 60A waterproof ESC
• Main chip: EFM8BB21 (8bit 48MHz)
• Input Voltage: 3-6S LiPo
• Constant current: 4×60A
• Peak current: 4×80A (5s)
• Throttle support protocol: Dshot 300/600
• Galvanometer: Yes (Current Meter Scale=125)
• Telemetry: No
• Firmware: J_H_30 (BlueJay)
• Power: #14AWG/120mm
• Mounting hole dimensions: 30.5×30.5mm
• Dimensions: 46×42.5mm
• Weight: 24.4g.