Speed controller 30A SimonK ESC

Order a 30A SimonK ESC speed controller for your quadcopter at a competitive price

Speed Controller 30A SimonK ESC is an electronic speed controller used in quadcopters and other RC models. It is designed to control brushless electric motors (BLDC), the rotation of which must be smooth and consistent with the specified loads. Its current rating is 30 amperes.

A special feature of the SimonK ESC regulator is the built-in SimonK firmware. It is optimized for fast response and high signal update rates. This makes it especially popular among multi-platform users and FPV (First Person View) quadcopter pilots, where a small delay or inaccuracy in the signal can have a huge impact on flight stability and control of the aircraft.

Installation and connection of the regulator

1. Solder the appropriate wires to the motor windings.
2. Connect the power connector to the battery.
3. Connect the output cable from the ESC to the servo signal connector on your flight controller.
4. Calibrate the ESC according to the instructions for the ESC and your flight controller. Typically, this involves briefly raising the signal and then returning to a low level so that the ESC can discern the control limits of your particular machine.

Benefits of use

1. Fast response to signal.
2. Ability to customize parameters such as timing, control frequency and soft start.
3. Reliability and flexibility of software that is updated and improved over time.
4. Good compatibility with a wide range of brushless motors.

Please note that ESCs may become hot during operation, so install them in an area with good ventilation or cooling. Also check the current and voltage limits of your set of equipment to avoid overloading and damaging components.

Output voltage: constant 30A, peak 40A for up to 10 seconds.