GPS module GEPRC GEP-M1025Q

Order the GEPRC GEP-M1025Q GPS module - get lightning-fast satellite acquisition for your drone

Provide your quadcopter with reliable navigation. The powerful GEPRC GEP-M1025Q module is designed for this. It provides incredibly fast satellite acquisition. Your drone will always know its location.

This is a key solution for safe flights. The module will return the drone home if there are problems. You will stop worrying about signal loss. Fly long distances with confidence.

Five key advantages of the module:

• Ultra-fast satellite acquisition with the new u-blox M10 chip.

• Supports four systems: GPS, GLONASS, Galileo, QZSS.

• Highest positioning and height accuracy.

• Compact and lightweight housing for easy installation.

• Stable operation even in difficult urban conditions.

Operating principle and technical features

The essence of the module's operation is satellite navigation. It simultaneously receives signals from different groups. GPS, GLONASS, Galileo and QZSS are used. This maximizes the number of visible satellites.

The advanced u-blox M10 chip processes all data. It calculates exact coordinates, altitude and speed. All information is transmitted to the flight controller. This happens at a very high update rate.

The module has excellent compatibility. It works with Betaflight, iNAV and ArduPilot firmware. You can easily configure all the necessary functions. The installation process will take a minimum of time.

Technical characteristics demonstrate high class. The supply voltage ranges from 3.0V to 4.5V. The data update rate reaches 10 times per second. This is critical for dynamic flights.

The device supports NMEA and UBX communication protocols. The built-in antenna has high reception sensitivity. Light weight and size will not affect flight performance. The module will easily fit on any frame.

Activate the automatic return to home (RTH) feature. Plan complex flights using waypoints. Monitor coordinates in real time via OSD. This will significantly improve the safety of your flights.

Specifications

• Chip: u-blox M10050
• Compass: QMC5883L
• Input voltage: 3.3-5V
• Frequency: GPS L1, GLONASS L1, BDS B1, Galileo E1, SBAS L1, QZSS L1
• Operation mode: GPS+BDS+GALILEO+QZSS+SBAS joint positioning
• Channels: 72
• Satellites: up to 32 pcs.
• Communication protocol: UART (u-blox) / I2C (compass)
• Output protocol: u-blox
• Baud rate: 115200 bps
• Output frequency: 10Hz
• Speed accuracy: 0.05m/s
• Horizontal positioning accuracy: 2D 1.5m
• Timing accuracy: 30 ns
• Receive sensitivity: trace -162 dBm, capture -160 dBm
• Dynamic characteristics:
• Maximum altitude: 50000 m
• Maximum speed: 500 m/s.
• Maximum acceleration: 4G
• Size: 29 × 29 × 8.5 mm
• Weight: 13 g.