GNSS Antenna Harxon HX-CH6601A

Order the Harxon HX-CH6601A GNSS antenna - get accuracy and reliability for your drone

Give your drone or robotic platform superior positioning accuracy. The Harxon HX-CH6601A antenna is a professional solution. It opens up new possibilities for autonomous flight and complex missions. You will receive a stable signal even in difficult conditions.

This device will become a key component of your system. It is designed to receive signals from satellite systems. Multi-frequency and support for all standards are its main trump cards. The antenna converts satellite signals into precise coordinates.

5 main advantages of the antenna 

• High-precision reception of signals from all satellite systems.

• Full support for modern L1/L2/L5/L6 frequencies.

• Effective multipath and interference suppression.

• Compact and durable housing for any conditions.

• Stable operation at extreme temperatures.

Operating principle and key characteristics

The antenna picks up radio signals from orbiting satellites. It receives data from GLONASS, GPS, BeiDou and Galileo. The signals are then amplified and filtered from interference. This allows you to accurately calculate the location of an object.

Ceramic driver provides superior performance. Circular polarization preserves the signal when tilted. Built-in LNA amplifier minimizes cable losses. This ensures a clean and powerful signal to your receiver.

Specific functionality and technical details

The antenna supports all major frequency bands. These are the L1, L2, L5 bands for GPS and Galileo. L1, L2, L3 for GLONASS are also supported. And bands B1, B2, B3 for the Chinese BeiDou system.

The gain is up to 28 dB. The supply voltage ranges from 3 to 5 V. The antenna has a standard connection via an SMA connector. Its dimensions are only 60 x 60 x 14.5 mm. The weight of the device does not exceed 110 grams.

It is an ideal choice for professional UAVs. It is suitable for cartography and aerial photography. Precision farming and construction monitoring are also her areas of expertise. The reliability of the device has been tested in real projects.

Specifications

• GPS L1 / L2
• GLONASS L1/L2
• BDS B1 / B2
• GALILEO E1
• L-band
• Nominal impedance 50 ohms
• RHCP polarization
• Axial ratio ≤3dB
• Gain at Zenith (90°)
• 1217-1257 MHz 2 dBi (maximum)
• 1559-1610 MHz 2.5 dBi (maximum)
• LNA Gain 33 dB (typical)
• Noise figure ≤1.5dB
• Output/Input VSWR ≤2.0
• Operating voltage +3.3 to +12 VDC
• Power (maximum) 55 mA
• Dimensions ¢27.5*59mm
• SMA(m) connector
• Weight ≤25g
• Operating temperature -40℃ to +70℃
• Storage from -40℃ to +70℃
• Humidity 95% non-condensing
• Moisture/dustproof ip67②
• Compliance with CE, RoHS, REACH regulations.