Flight controller Matek F405-WMN

Order the Matek F405-WMN flight controller at an affordable price!

The Matek F405-WMN flight controller is a modern solution for drones. It is ideal for both beginners and experienced pilots. This model is characterized by high performance and reliability. Matek F405-WMN supports various flight modes. This allows it to be used in a variety of scenarios, from racing to aerial photography.

The controller is equipped with an STM32F405 processor. It provides fast data processing and stable operation. A built-in barometer helps maintain altitude during flight. This makes flying the drone easier and safer. It is also worth noting the presence of a built-in OSD. This allows important data to be displayed directly on the video.

Benefits and Features

One of the main advantages is its compact size. The controller can be easily installed on most drone frames. Matek F405-WMN supports many communication protocols. This allows it to be used with a variety of receivers and transmitters. There is also support for Betaflight and INAV. This makes it possible to fine-tune flight parameters.

The controller has many inputs and outputs. This allows you to connect additional sensors and devices. For example, you can install GPS, which expands the functionality of the drone. Matek F405-WMN also supports various types of ESC. This makes it a universal solution for any project.

Finally, it is worth noting the affordable price of the controller. It offers excellent value for money. The Matek F405-WMN is a reliable choice for your drone. You can enjoy your flight in maximum comfort. Don't miss the opportunity to purchase this controller in our AEGISKY online store!

Specifications

• Microcontroller: STM32F405RGT6 168 MHz
• Gyro: ICM42688P
• OSD: AT7456E
• Barometer: Goertek SPL06-001
• Black box: 16 MB
• UART ports: 5 pcs.
• Softserial_Tx (INAV): 1 pc.
• PWM outputs: 12 pcs.
• I2C: 1 pc.
• ADC: 3 (VBAT, current, RSSI)
• PINIO: 1 pc.
• Built-in inverter on UART2-RX for SBUS input
• Switchable inputs for two cameras
• Input: 6 - 30 V (2-6S LiPo)
• Current sensor: 132 A (INAV Scale 250, ArduPilot 40A/V)
• PDB/current sense resistor: 90 A continuous, 132 A pulsed
• BEC 5V: 1.5A
• BEC Vx (5/6 V): 5 A
• Vbat for VTX and camera
• LDO 3.3V 200mA
• Battery voltage sensor: 1k:20k
• Supported firmware:
• ArduPilot (target MatekF405-TE)
• INAV (target MATEKF405TE)
• Mounting holes: 22 × 22 mm / Ø2 mm
• Dimensions: 31 × 26 × 16.5 mm
• Weight: 10 g.