ESC regulator T-MOTOR AM16A 16A

Choose the compact T-MOTOR AM16A 16A ESC controller for your micro-drone!

Give your miniature aircraft precise, reliable control. The T-MOTOR AM16A 16A regulator is designed specifically for light drones and model aircraft. It can handle 16 amps of continuous current and up to 25 amps of peak load for 15 seconds .

The device supports a wide voltage range from 2S to 4S LiPo. You will be able to power the motors and get stable operation in any mode. It is an ideal choice for micro drones weighing up to 320 grams. Choose quality and reliability from the legendary T-MOTOR brand. Order AM16A right now in our store.

• Compact dimensions of only 24x12x6.2 mm for installation in limited space.

• Low weight of 8.5 grams for ultra-lightweight designs.

• High power 16A DC and 25A peak.

• Supports wide input voltage range 2-4S LiPo (7.4-14.8V).

• Built-in BEC to power the flight controller and receiver .

Operating principle and design

The T-MOTOR AM16A regulator is an electronic device for controlling the rotation speed of brushless motors. It receives signals from the flight controller or receiver using standard protocols. The built-in microprocessor instantly processes the pilot's commands and supplies voltage to the motor windings. The device is capable of working in both 3D and 4D modes with reverse rotation. This is especially important for aerobatic models performing complex aerobatic maneuvers.

The regulator is equipped with a built-in BEC voltage stabilizer to power the on-board electronics. Compact dimensions of 24x12x6.2 mm allow the device to be placed in the tightest compartments of the fuselage. Weighing only 8.5 grams, it does not weigh down the design and maintains excellent flight characteristics.

Specifications and performance

Study the detailed parameters of the T-MOTOR AM16A regulator. The DC current rating is 16 amps. Peak current reaches 25 amps within 15 seconds . Operating voltage from 2 to 4 LiPo cells (7.4–14.8 Volts).

The overall dimensions of the device are 24 mm in length, 12 mm in width and 6.2 mm in height. The regulator weighs 8.5 grams. The built-in BEC provides power to the flight controller and receiver .

The regulator is ideal for models weighing from 120 to 320 grams. It is compatible with T-MOTOR AM40 series motors and other brushless motors of similar power . Simple installation and configuration do not require special skills.

Areas of application and operation

The T-MOTOR AM16A controller is ideal for micro drones and miniature drones. It performs well in F3P indoor aerobatic models . Used in lightweight racing drones measuring 3-4 inches. Suitable for educational and training aircraft models. This is the choice of pilots who value compactness and reliability.

For correct operation, use high-quality connectors and wires of sufficient cross-section. Provide good airflow to the regulator for efficient cooling. Before your first flight, calibrate the throttle range according to the instructions. Regularly check the reliability of soldering and the condition of the wire insulation.

Specifications

• Rated current: 16 A constant, 25 A peak
• Voltage: 2–4S LiPo (7.4–14.8 V)​
• Weight: 8.5 g​
• Dimensions: 24×12×6.2 mm.