
Frequency range: 50 kHz – 6.3 GHz
AED · سعر الوحدة الاسترشادي للمرجعية. تُقدَّم أسعار الكميات والمشاريع في عرض السعر؛ ويختلف MOQ ومهلة التسليم حسب المنتج.
التوفر ومهل التسليم
الشحن من هونغ كونغ · DAP أو FOB هونغ كونغ.
شحن مُتتبَّع حول العالم
DHL · FedEx · UPS · EMS، بالإضافة إلى الشحن الجوي والبحري والسككي
رخصة تصدير جاهزة
مستندات ECCN وCO وCI وPL وEUS
لا تشمل أسعار المنتجات وعروض الشحن رسوم الاستيراد أو الضرائب أو رسوم التخليص الجمركي — تفرضها هيئة الجمارك في بلد الوجهة. قدرها أعلاه أو اقرأ دليل رسوم الاستيراد وضريبة القيمة المضافة.
تصنيف تقديري آلي لأغراض الفحص فقط — وليس ECCN أو CCATS صادرًا عن الشركة المصنّعة. يتم توفير التصنيف المؤكد ووثائق التصدير قبل عرض السعر والشحن.
منتجات أصلية
توزيع معتمد
دعم هندسي
مساعدة الاختيار قبل البيع وRMA بعد البيع
Secure, milestone-based payment
T/T 30/70 terms and irrevocable L/C over US$50,000. Funds follow agreed milestones — you never pay an unknown seller upfront.
Payment protectionVetted supplier, Aegisky as contracting window
Suppliers pass KYC/KYB and export-capability review; Aegisky — not an anonymous third party — is your single contracting and communication window.
View supplier profileExport compliance on every controlled order
ECCN classification, sanctions screening and end-use/end-user documentation are handled before quotation is finalised.
Export compliance14-day defective/DOA protection & warranty handling
Defective or dead-on-arrival items are accepted within 14 days via RMA; warranty claims and spare-parts support are handled through the trade desk.
Returns & warrantyأسعار المكونات عامة. سجّل الدخول لعرض أسعار الأساطيل وحفظ عروض الأسعار وتتبع الطلبات وإتمام الشراء بشكل أسرع — يستغرق إنشاء حساب تجاري حوالي دقيقة.
سجّل الدخول للطلب →Vector network analyzer LiteVNA 64 is a modern measuring instrument for radio frequency devices. It allows you to analyze the parameters of antennas, filters, cables and circuits. You can fine-tune your equipment to operate at the desired frequencies. This device is indispensable for the development and debugging of radio electronics. Its capabilities were previously available only in expensive laboratory instruments.
This device uses the vector measurement method. It measures not only the amplitude of the signal, but also its phase. This gives a complete picture of the behavior of the device under study. You will see how your antenna or filter behaves in the real frequency range. It is a key tool for achieving maximum efficiency in wireless systems.
Wide frequency range for analyzing most modern devices.
Vector measurements amplitudes and phases for complex analysis.
Portability and autonomy from a computer with its own display.
Intuitive interface and support for the Blastdrak language in the software.
Great value for money for amateurs and professionals.
The device generates a test signal of known frequency and amplitude. It supplies this signal to the input of the device under test (for example, an antenna). The analyzer then measures the signal reflected and transmitted through the device. By comparing them with the original signal, it calculates complex coefficients. These coefficients show how the device affects the signal.
Based on this data, graphs and parameters are built. The most famous graph is the SWR (SWR, or SWR). It shows how well the antenna is matched to the transmitter. Reflectance (S11) and transmission (S21) are also measured. This allows you to see the bandwidth of the filter or the resonant frequency of the antenna. You get digital data and visual graphs.
LiteVNA 64 has impressive parameters for its class. The operating frequency range is usually from 50 kHz to 6.4 GHz. The dynamic range can reach 80-100 dB. Frequency resolution is very high for detailed measurements. The device has two ports for connecting devices under test. It can work both independently and in conjunction with a computer.
The functionality includes all the main modes of the vector analyzer. Measurement of S-parameters (S11, S21, S12, S22) for two-port devices. Plotting graphs of SWR, impedance, reflection coefficient in polar coordinates. TDR mode (time domain reflectometry) for searching for breaks in cables. Calibration with calibration load kit for improved accuracy.
This device is critical for FPV developers and enthusiasts. It can be used to fine-tune the video transmitter antenna for maximum range. Check the workmanship or coordination of the homemade antenna. Analyze and tune bandpass filters to suppress interference. Diagnose problems in coaxial cables and connectors.
The device is compact and can be used in the field. For example, for quick testing of antennas right on the airfield. Autonomous battery operation makes it completely mobile. A simple interface allows you to quickly get the necessary data. Detailed analysis can be carried out by connecting the device to a computer via USB.