Power supply AKIP-1203/1

Buy the AKIP-1203/1 power supply for accurate and reliable testing of your devices!

The programmable power supply AKIP-1203/1 is a professional device for laboratories and industries. The model produces a clean AC and DC signal with minimal distortion. It is ideal for electronics testing, emergency simulation and calibration. With this source you will receive stable and accurate power for any application.

• Versatility: generation of alternating and direct voltage.
• Wide frequency range from 10 Hz to 5 kHz for any test.
• Low harmonic distortion of 0.5% for a clean signal without distortion.
• Programming and control via USB, LAN and RS-232 interfaces.
• Built-in software for simulating voltage sags and surges.

Choose a powerful power supply for professional testing

Power supply AKIP-1203/1 produces 750 W power . In AC mode, 1-150V and 2-300V ranges are available . The maximum current is 6 A (rms) . In DC mode, the range is adjustable from ±50 to ±400 V . The voltage setting step is only 0.01 V .

Output frequency adjustable from 10 to 5000 Hz . Harmonic coefficient does not exceed 0.5% . The device simultaneously displays voltage, frequency, current and power . Output connectors are located on the front and rear panels . The dimensions of the device are 483×151×720 mm. The weight of the device is 50 kg . Power is supplied from a single-phase 220 V network.

A special feature of the model is the function of modeling emergency situations. Firmware creates voltage dips and spikes . The device is equipped with a dimmer function to adjust the signal duty cycle . Multi-level protection prevents overheating and overcurrent . Control is possible via GPIB, USB, RS-232 and LAN interfaces . Key lock protects settings from accidental changes . High accuracy and stability make it indispensable in any laboratory.

Reliable equipment from the AKIP brand at AEGISKY

Manufacturer AKIP is a brand under which high-precision measuring instruments are produced. Country of origin: China . The equipment is included in the State Register of Measuring Instruments of the Russian Federation under number 78919-20 . This confirms its compliance with state accuracy standards. AKIP products are widely used in electronics, energy and scientific research. Each device undergoes strict quality control before release. Power supply warranty is 1 year .

A feature of the AKIP-1203 series is scalability and versatility. Model 1203/1 is the base model in the line with a power of 750 W . There are versions 1203/2 at 1500 W and 1203/3 at 3000 W . All models support master-slave parallel connection . This allows you to increase power for specific tasks. Built-in arbitrary waveform generator expands testing capabilities . AKIP-1203/1 is an investment in the quality and accuracy of your measurements.

• Number of channels: 1
• Output voltage: 300V
• Output current: 3A
• Maximum output power: 375 W
• Voltage stability: not specified
• Current stability: not specified
• Voltage ripple: not specified
• Current ripple: not specified
• Interfaces: USB, LAN, RS-232, GPIB
• Power: 220 V
• Operating temperature: from 0 to +40 °C
• Storage temperature: -20 to +70 °C
• Overall dimensions: 483 × 151 × 719 mm
• Weight: 50 kg