GPS وحدة لـ Pixhawk Readytosky Ublox NEO-M8N

Order the original Readytosky Ublox NEO-M8N GPS module - precise positioning for your drone

The GPS module for the Pixhawk Readytosky NEO-M8N is a key component for autonomous flight. It provides accurate location of your drone. The module is designed to work with the popular Pixhawk controllers. The device supports several satellite systems simultaneously. This guarantees high reliability and speed of positioning. Your copter will know its exact location.

The module is based on the modern Ublox NEO-M8N chipset. This chip features low power consumption and high sensitivity. It quickly picks up satellite signals even in difficult conditions. Positioning accuracy reaches several meters. This is important for stable position holding and point-by-point flight.

Technical features and important advantages

The device supports all major navigation systems. These are GPS, GLONASS, BeiDou and Galileo. The number of visible satellites will always be maximum. The module has a built-in digital compass (magnetometer). It determines the vehicle's course relative to the north. This is necessary for the autopilot functions to work correctly.

There is a safety switch on the board. It allows you to turn off the motors in an emergency. This is an important function for ensuring flight safety. The module is equipped with LED status indicators. They show the satellite search process and operating mode.

Key Benefits

• Support four systems: GPS, GLONASS, BeiDou and Galileo.

• High positioning accuracy based on the Ublox NEO-M8N chipset.

• Built-in digital compass to determine the course of the device.

• Availability of a safety switch for emergency shutdown of motors.

• Full compatibility with Pixhawk and ArduPilot flight controllers.

The Readytosky Ublox NEO-M8N is a reliable choice for the pilot. It provides stable and accurate navigation for your drone. The module is easy to connect and configure. Buy it from the aegisky online store.

Specifications

• Receiver type: 72 channel u-blox M8 motor
• GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1
• SBAS L1 C/A: WAAS, EGNOS, MSAS
• Galileo-ready E1B/C (NEO-M8N)
• Navigation update rate1 Unified GNSS: Up to 18 Hz
• Parallel GNSS: Up to 10 Hz
• Location accuracy 2.0 m KVO
• Data acquisition2 Cold starts: 26 s
• Semi-automatic starts: 2 s
• Reacquisition: 1.5s
• Sensitivity2 to tracking and navigation: -167 dBm
• Cold starts: -148 dBm
• Hot starts: -156 dBm
• AssistNow Online mode
• AssistNow Offline mode (up to 35 days)
• AssistNow Autonomous mode (up to 6 days)
• OMA SUPL and 3GPP Compliant
• Oscillator TCXO (NEO-M8N/Q),
• Crystal (NEO-M8M)
• Built-in RTC crystal

Additional options

• Noise figure of the built-in LNA (NEO-M8M). Additional LNA for
• lowest noise level (NEO-M8N/Q)
• Anti-interference, active detection and removal of continuous waves. Additionally
  built-in SAW bandpass filter (NEO-M8N/Q)
• Memory ROM (NEO-M8M/Q) or Flash (NEO-M8N)
• Supported antennas active and passive
• Odometer
• Position, Speed and Time Data Logger (NEO-M8N)
• Operating temperature -40°C to 85°C
• Storage temperature -40°C to 85°C (NEO-M8N/Q)
• -40°C to 105°C (NEO-M8M)
• RoHS Compliant (Lead Free)
• Qualification according to ISO 16750
• Manufactured and fully tested in ISO/TS 16949 certified manufacturing facilities
• Uses u-blox M8 chips in accordance with AEC-Q100
• Supply voltage 1.65V to 3.6V (NEO-M8M)
• 2.7V to 3.6V (NEO-M8N/Q)
• Power Consumption4 23 mA @ 3.0 V (continuous)
• 5 mA at 3.0 V in power saving mode
• (1 Hz, GPS mode only)
• Backup power 1.4 to 3.6 V
• NEO-M8N-0 u-blox M8 parallel GNSS LCC module,
• TCXO, flash, SAW, LNA,
• Configurable time pulse from 0.25 Hz to 10 MHz.