ESC regulator Hobbywing QUICRUN WP-10BL80

Choose protected power - ESC controller Hobbywing QUICRUN WP-10BL80 for quadcopter!

ESC controller Hobbywing QUICRUN WP-10BL80 is a waterproof and dustproof controller. This model is designed for use in difficult weather conditions. It provides reliable control of brushless motors. You will get stable operation of the power plant at any humidity. This controller will be the basis for an all-weather drone.

Five main advantages 

• Full protection from water and dust (waterproof standard).

• High continuous current 80A for powerful motors.

• Reliable operation with 2-4S batteries (up to 16.8V).

• Rugged compound body for durability.

• Compatible with popular motors and protocols.

Operating principle and scope of application of the regulator

ESC Hobbywing QUICRUN WP-10BL80 controls the speed of the brushless motor. It receives commands from the receiver or flight controller. The internal board processes the signal and generates three-phase current. This current is applied in series to the three windings of the motor. As a result, the engine rotates smoothly and at a given speed.

Its key feature is its sealed design. All components are filled with a special compound. This protects electronics from water, dirt and salt spray. You can fly in rain, snow and over water surfaces. System reliability is significantly increased.

Technical characteristics and functionality

The technical parameters make this ESC a universal solution. Continuous operating current is 80 Amps. The peak current can reach 480A within a few seconds. The regulator supports 2-4S (7.4V-16.8V) lithium polymer batteries. The built-in BEC produces stable 5.5V-6V with current up to 3A. This is enough to power the receiver and servos.

The case is completely sealed and does not require additional boxing. It is resistant to vibration and moderate shock loads. High-quality heat-resistant wires are used for connection. The system has protection against overheating and overload. Automatic shutdown saves the device in an emergency.

The regulator operates on smooth and predictable algorithms. It is compatible with most standard brushless motors. Configuration is carried out using a programming card. You can select several operating and braking modes. Gas calibration is quick and easy.

This ESC is ideal for building an all-weather quadcopter. It is indispensable for aerial photography in difficult climatic conditions. It is chosen by researchers and extreme flight enthusiasts. You will be able to expand the boundaries of your piloting. Protection gives confidence when flying over water bodies and in the off-season.

Specifications 

• Maximum continuous current: 80A
• Peak current: 240A
• Supply voltage: 2–4S LiPo (7.4–14.8 V)
• Dimensions: 36 × 30 × 15.5 mm
• Weight: 48 g
• Protection: IP67 (waterproof, dustproof).