1 منتج
الموديلات الشائعة: Current converter Seneca T201DCH300-M
Keep your equipment safe and efficient with Seneca current converters. These devices measure AC and DC current without direct contact. Converters turn the current into a standard signal for controllers. You will receive accurate load information and prevent accidents.
Non-contact current measurement up to 300 A.
High measurement accuracy with an error of up to 0.2%.
Loop powered for ease of integration.
Compact housing for DIN rail mounting.
RS-485 digital interface with Modbus RTU support.
The Seneca converter measures current using the non-contact principle. A power cable carrying current is passed through a hole in the housing. The magnetic field arising around the conductor is captured by the sensor. It converts the field magnitude into a unified electrical signal. This can be an analog 4...20 mA signal or a digital protocol. Data can be easily read by any controller or data acquisition system. You get accurate data without interfering with the power circuit.
The Seneca range includes models for different tasks. Seneca T201measures alternating current up to 40 A. The frequency of the measured current can be from 20 to 1000 Hz. Powered directly from the 5…28 V DC current loop.
TheSeneca T201DCHseries measures both AC and DC current up to 300 A. Equipped with an RS-485 digital interface and supports Modbus RTU protocol. This allows you to configure the sensor parameters remotely and read the readings.
Seneca converters are used to control the load on electric motors and pumps. By changing the current, you can diagnose the condition of the drive. In building management systems, sensors monitor energy consumption. This helps save resources and identify inefficient operating modes.
The devices also provide circuit integrity monitoring. For example, checking the serviceability of heating elements in industrial installations.
All converters are distinguished by high-quality performance and long service life. They are designed to work in harsh industrial environments.