1 منتج
الموديلات الشائعة: Attenuator KROKS 50 Ohm, 30 dB, 10 W (0-3 GHz) N-connector
Achieve ideal signal quality in your RF circuits. KROKS attenuators and ICs are passive components for radio amateurs and engineers. They allow you to precisely control the power of the transmitted signal. These devices are indispensable for configuring and protecting radio equipment. You can eliminate congestion and improve path performance.
High accuracy of signal attenuation and stability of parameters.
Wide operating frequency range up to several GHz.
Compact design and convenient for surface mounting (SMD).
Linear amplitude-frequency response (AFC).
High power dissipation and reliability.
The KROKS attenuator is a controlled resistance in the RF path. Its main task is to attenuate the power of the input signal by a given amount. This happens without significant distortion of its shape. An attenuator does not enhance the signal, but only reduces it.
It works on the principle of a voltage divider. High-frequency resistors of a special design are used inside. They form a circuit that absorbs part of the signal energy. The output is the same signal, but with a smaller amplitude. This allows levels to be coordinated between different stages of the equipment.
The KROKS range includes various types of attenuators. For example,AT series fixed attenuators. ModelAT-3provides attenuation of exactly 3 dB. Other popular values: 6 dB, 10 dB, 20 dB. They are used to constantly adjust the signal level.
These components operate over a wide frequency range. For example, from 0 to 3000 MHz (3 GHz). The characteristic impedance is standard - 50 Ohms. The power that such an attenuator can dissipate reaches 2 W. This is important for working with powerful transmitters.
Separate category -step (switchable) attenuators. For example, modelKROKS 30dB 0-30dBi. It allows you to change the attenuation level. This can be done discretely, in steps of 1 dB. Control is carried out by a mechanical switch or digitally.
Also availableadjustable (variable) attenuators. Their resistance changes smoothly. This is convenient for fine tuning in measuring systems. Allows you to find the optimal operating point without replacing a component.
In addition to attenuators, KROKS offers related solutions. ThisRF switches (SPDT, DPDT)on PIN diodes. They control the direction of passage of the high-frequency signal. Used to switch antennas or channels.
Also in the catalog there ismatching transformers and baluns. They convert a symmetrical line into an asymmetrical one. This is necessary for correct connection of the antennas. For example, vibrator or frame to a coaxial cable.
All components have surface mount housings. Standard sizes: 0603, 0805, 1206. This complies with international standards. Facilitates automated PCB assembly.
KROKS attenuators are used in various fields. In amateur and professional radio communications to protect receiver inputs. A strong signal from a nearby antenna may damage the device. The attenuator will weaken it to a safe level.
In measurement technology for calibration of generators and analyzers. Allows you to expand the dynamic range of measuring instruments. Obtain accurate data on the parameters of the device under test.
In FPV equipment for setting up a video line. If the video transmitter is too powerful for a short distance. He can overwhelm the receiver. The attenuator will reduce the power to the optimal value.
In Wi-Fi and cellular systems to equalize levels. When constructing complex branched antenna systems. Where it is necessary to provide the same power at all points.
When choosing a KROKS attenuator, consider key parameters. Required attenuation factor in decibels (dB). The operating frequency range of your signal. The maximum power that will need to be dissipated.
The wave impedance of the path is also important. This is typically 50 ohms for most RF systems. Or 75 Ohm for television equipment. Choose the appropriate component.
Products with connectors are suitable for field installation. For example, SMA or N-type. For installation on a board - SMD version. Always ensure good heat dissipation for high-power models.